Change search
ReferencesLink to record
Permanent link

Direct link
Effective Models for Simulation of Thermal Stratification and Mixing Induced by Steam Injection into a Large Pool of Water
KTH, School of Engineering Sciences (SCI), Physics, Nuclear Power Safety.
2014 (English)Doctoral thesis, monograph (Other academic)
Abstract [en]

Steam venting and condensation in a large pool of water creates both a source of heat and a source of momentum. Complex interplay between these two sources leads to either thermal stratification or mixing. If heat source dominates, development of thermal stratification in a Pressure Suppression Pool (PSP) of a Boiling Water Reactor (BWR) increases temperature of the free surface which reduces the steam condensation capacity of the pool and can lead to significant pressure increase in the containment. If mixing is dominant it is important to know how fast a stratified pool can be mixed to restore the steam condensation capacity and reduce containment pressure. Advanced modeling and simulation of direct contact condensation in large systems remains a challenge as evident in commercial and research codes mainly due to long transients and small time-steps to resolve direct contact condensation on the free surface of steam-water interface. In this work, effective models, namely, the Effective Heat Source (EHS) and Effective Momentum Source (EMS) models are proposed to model and simulate thermal stratification and mixing during a steam injection into a large pool of water. The EHS/EMS models are developed for steam injection through a vertical pipe submerged in a pool under two condensation regimes: complete condensation inside the pipe and chugging. These models are (i) computationally efficient, since small scale phenomena of steam injection and direct contact condensation are not resolved explicitly, and (ii) sufficiently accurate, since the integral effect of these phenomena on the large scale flow structure and temperature distribution in the pool is taken into account. These effective models are implemented in GOTHICĀ® software and validated against POOLEX and PPOOLEX tests. Excellent agreement in averaged pool temperature and water level in the pool between the experiment and simulation has been achieved. The development of thermal stratification and mixing of the pool are also well captured in the simulation. Lastly, a scaling approach is proposed to generalize available data on the effective amplitude and frequency of oscillations during chugging.

Place, publisher, year, edition, pages
Stockholm: KTH Royal Institute of Technology, 2014. , 129 p.
TRITA-FYS, ISSN 0280-316X ; 2014:20
Keyword [en]
Thermal Stratification, Mixing, Pressure Suppression Pool, Containment, Thermal Hydraulic, GOTHIC, Light Water Reactor
National Category
Other Physics Topics
Research subject
URN: urn:nbn:se:kth:diva-145151ISBN: 978-91-7595-154-6OAI: diva2:716824
Public defence
2014-05-23, FD5, AlbaNova Universitetscentrum, Roslagstullsbacken 21, Stockholm, 10:00 (English)

QC 20140513

Available from: 2014-05-13 Created: 2014-05-12 Last updated: 2014-05-13Bibliographically approved

Open Access in DiVA

HuaLiThesis(12789 kB)674 downloads
File information
File name FULLTEXT01.pdfFile size 12789 kBChecksum SHA-512
Type fulltextMimetype application/pdf

Search in DiVA

By author/editor
Li, Hua
By organisation
Nuclear Power Safety
Other Physics Topics

Search outside of DiVA

GoogleGoogle Scholar
Total: 674 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 153 hits
ReferencesLink to record
Permanent link

Direct link