Change search
ReferencesLink to record
Permanent link

Direct link
Preparation of Activated Carbon from Caribbean Pine by Chemical Activation
KTH, School of Chemical Science and Engineering (CHE).
KTH, School of Chemical Science and Engineering (CHE).
2013 (English)Independent thesis Advanced level (professional degree), 20 credits / 30 HE creditsStudent thesis
Abstract [en]

The main purpose for this project was to, by varying the parameters temperature (400 ˚C and 500 ˚C), acid concentration (10%, 25% and 40%), relative impregnation (0.75, 1.35 and 2.0) and impregnation time (1 h, 2 h and 3 h), evaluate which parameters that affect the product. Also, an investigation was made to determine the interaction of the different parameters. This was done by analysing the properties of the AC with gas adsorption of gasoline and ammonia. Liquid adsorption was analysed with iodine number and the yield of the AC was calculated with two different methods.

In general an increasing of the temperature and the impregnation time results in a higher iodine number and higher capacity to absorb gasoline in the produced activated carbon. When the conditions were too strong the iodine number and the capacity to absorb gasoline decreased. The pore structure of the activated carbon is destroyed by too strong conditions.

The results were also analysed with a computer program to establish statistical evidence of influence from the parameters indicating that temperature has strong effect on iodine number of the produced activated carbon. If the AC from Caribbean Pine would be commercially produced the recommended design is to keep all parameters low. This is both cost effective and energy efficient.

Based on the experimental results it was determined that the AC from Caribbean Pine is better suited for adsorbing gasoline compared with ammonia. Furthermore, the adsorption of gasoline is increasing with an increasing temperature. An industrial manufactured AC was compared with the AC produced from Caribbean Pine and it had a better liquid and gas adsorption showing that more research and optimization of AC from Caribbean Pine must be done before commercializing the product.

A suggestion for further research is to use the time in the oven as a parameter to be varied in the experimental setup. This could be valuable in order to determine the influence of the time in the oven both concerning the yield but also the adsorption ability of the AC.

Place, publisher, year, edition, pages
2013. , 50 p.
Keyword [en]
Activated carbon, Caribbean Pine, Chemical activation, Phosphoric acid, Wood
National Category
Engineering and Technology
URN: urn:nbn:se:kth:diva-146825OAI: diva2:725410
Available from: 2014-06-16 Created: 2014-06-16 Last updated: 2014-06-16Bibliographically approved

Open Access in DiVA

fulltext(653 kB)123 downloads
File information
File name FULLTEXT01.pdfFile size 653 kBChecksum SHA-512
Type fulltextMimetype application/pdf

By organisation
School of Chemical Science and Engineering (CHE)
Engineering and Technology

Search outside of DiVA

GoogleGoogle Scholar
Total: 123 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 75 hits
ReferencesLink to record
Permanent link

Direct link