Change search
ReferencesLink to record
Permanent link

Direct link
Gas-cooling of multiple short inline disks in flow along their axis
KTH, School of Engineering Sciences (SCI), Centres, Faxén Laboratory.
2010 (English)In: Quenching and Cooling, Residual Stress and Distortion Control, 2010, 795-819 p.Conference paper (Refereed)
Abstract [en]

To learn about cooling of gas quenched batches, this paper reports on numerical predictions of local and average convective heat transfer coefficients, and overall pressure drops, on batches of five axially aligned, constant temperature, short cylindrical disks (25 cm diameter, 5 cm thickness) with and without a concentric hole, with interdisk spacings of 5-20 cm, in axial turbulent flows of 20 bar nitrogen gas at inlet speeds from 10 m/s to 100 m/s, corresponding to Reynolds numbers (Re) between 3.27×106 and 32.7×106. The heat transfer coefficients along the disk surfaces vary strongly up to a worse case of two orders of magnitude for the upstream disk. This nonuniformity is much lower for the disks downstream, especially after spacing is increased beyond 0.1 m. As expected, the upstream disk exhibited rather different heat transfer coefficients than the ones downstream, the magnitude of the heat transfer coefficient and its uniformity increased with the interdisk spacing, and varied by a factor of about 4-5 along the surfaces. The average heat transfer coefficient (Nusselt number, Nu) on the disks increased approximately with Reynolds number as Re0.85. Re did not have much influence on the nonuniformity of Nu on the disk surfaces. The overall pressure drop along the flow increases with the interdisk spacing, rising by about 60 % as the spacing is increased from 0.05 m to 0.20 m. The presence of a hole increases the heat transfer coefficient in all cases. Some suggestions for reducing the heat transfer coefficient nonuniformity are made.

Place, publisher, year, edition, pages
2010. 795-819 p.
, ASTM Special Technical Publication, ISSN 0066-0558 ; 1523
Keyword [en]
Convective heat transfer, Gas quenching, Quenching, Quenching simulation, Quenching uniformity
National Category
Applied Mechanics
URN: urn:nbn:se:kth:diva-150065DOI: 10.1520/JAI101849ScopusID: 2-s2.0-78649917243ISBN: 978-080317509-9OAI: diva2:742000

QC 20140829

Available from: 2014-08-29 Created: 2014-08-29 Last updated: 2014-08-29Bibliographically approved

Open Access in DiVA

No full text

Other links

Publisher's full textScopus

Search in DiVA

By author/editor
Papadopoulos, Dimitrios
By organisation
Faxén Laboratory
Applied Mechanics

Search outside of DiVA

GoogleGoogle Scholar
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Altmetric score

Total: 9 hits
ReferencesLink to record
Permanent link

Direct link