Change search
ReferencesLink to record
Permanent link

Direct link
Ronchi test for characterization of X-ray nanofocusing optics and beamlines
KTH, School of Engineering Sciences (SCI), Applied Physics, Biomedical and X-ray Physics.
KTH, School of Engineering Sciences (SCI), Applied Physics, Biomedical and X-ray Physics.ORCID iD: 0000-0003-0152-6533
KTH, School of Engineering Sciences (SCI), Applied Physics, Biomedical and X-ray Physics.
Show others and affiliations
2014 (English)In: Journal of Synchrotron Radiation, ISSN 0909-0495, E-ISSN 1600-5775, Vol. 21, 1105-1109 p.Article in journal (Refereed) Published
Abstract [en]

A Ronchi interferometer for hard X-rays is reported in order to characterize the performance of the nanofocusing optics as well as the beamline stability. Characteristic interference fringes yield qualitative data on present aberrations in the optics. Moreover, the visibility of the fringes on the detector gives information on the degree of spatial coherence in the beamline. This enables the possibility to detect sources of instabilities in the beamline like vibrations of components or temperature drift. Examples are shown for two different nanofocusing hard X-ray optics: a compound refractive lens and a zone plate.

Place, publisher, year, edition, pages
2014. Vol. 21, 1105-1109 p.
Keyword [en]
zone plate, compound refractive lens, Ronchi interferometer
National Category
Physical Sciences
URN: urn:nbn:se:kth:diva-153856DOI: 10.1107/S160057751401323XISI: 000341687000025OAI: diva2:754524
Knut and Alice Wallenberg FoundationSwedish Foundation for Strategic Research

QC 20141010

Available from: 2014-10-10 Created: 2014-10-09 Last updated: 2015-01-12Bibliographically approved
In thesis
1. Nanofabrication of Zone Plates for Hard X-Ray Free-Electron Lasers
Open this publication in new window or tab >>Nanofabrication of Zone Plates for Hard X-Ray Free-Electron Lasers
2015 (English)Doctoral thesis, comprehensive summary (Other academic)
Abstract [en]

This Thesis describes the development of hard X-ray zone plates intended for focusing radiation at X-ray free-electron lasers (XFELs). XFELs provide unprecedented brightness and zone plates which are put in the intense X-ray beam are at risk of being damaged. Therefore, it is crucial to perform damage tests in order to design zone plates which can survive the XFEL beam.

Zone plates are diffractive nanofocusing optics and are regularly used at high brightness synchrotron beamlines in the soft and hard X-ray regime. The resolution of a zone plate is proportional to its outermost zonewidth and thus depends on the smallest feature that can be fabricated. State-of-the-art nanofabrication processes developed for zone plates are able to produce zonewidths down to 10 nm. However, for hard X-rays, the zone plates need to be of sufficient thickness to efficiently focus the radiation. Thus, the limit in the fabrication of hard X-ray zone plates lies in the high aspect-ratios. This Thesis describes two processes developed for high aspect-ratio nanostructuring. The first process uses tungsten as diffractive material. Aspect-ratios up to 1:15 have been accomplished. Furthermore, a mounting method of a central stop directly on the zone plate is also presented. The other fabrication process uses diamond, in which aspect-ratios of 1:30 have been demonstrated. Both processes rely on thin-film deposition techniques, electron-beam lithography, and reactive ion etching. Thanks to the materials’ excellent thermal properties these types of zone plates should be suitable for XFEL applications. Tungsten and diamond diffractive optics have been tested at an XFEL at Stanford (LCLS), and damage investigations were performed in order to determine the maximum fluence that could be imposed on the optics before degradation occured. The conclusion of these damage tests is that tungsten and diamond diffractive optics can survive the XFEL beam and could potentially be used in beamline experiments relying on nanofocused X-ray beams. Finally in this Thesis, characterization of two zone plates using an interferometer is presented, where it is also shown that the interferometric method can be used to pin-point beamline instabilities.

Place, publisher, year, edition, pages
Stockholm: KTH Royal Institute of Technology, 2015. xiii, 69 p.
TRITA-FYS, ISSN 0280-316X ; 2014:77
X-ray optics, Zone plates, Nanofabrication, X-ray free-electron lasers
National Category
Physical Sciences
Research subject
urn:nbn:se:kth:diva-158121 (URN)978-91-7595-406-6 (ISBN)
Public defence
2015-01-23, FA31, AlbaNova Universitetscentrum, Roslagstullsbacken 21, Stockholm, 10:00 (Swedish)

QC 20150112

Available from: 2015-01-12 Created: 2014-12-22 Last updated: 2015-01-12Bibliographically approved

Open Access in DiVA

No full text

Other links

Publisher's full text

Search in DiVA

By author/editor
Uhlén, FredrikRahomäki, JussiNilsson, DanielSanz, ClaudeVogt, Ulrich
By organisation
Biomedical and X-ray Physics
In the same journal
Journal of Synchrotron Radiation
Physical Sciences

Search outside of DiVA

GoogleGoogle Scholar
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Altmetric score

Total: 49 hits
ReferencesLink to record
Permanent link

Direct link