Change search
ReferencesLink to record
Permanent link

Direct link
A 2-mW Multi-mode Router Design with Dual-core Processor in 65 nm LL CMOS for Inter-silicon Communication
KTH, School of Information and Communication Technology (ICT), Industrial and Medical Electronics.ORCID iD: 0000-0002-7589-9749
KTH, School of Information and Communication Technology (ICT), Industrial and Medical Electronics.
KTH, School of Information and Communication Technology (ICT), Electronics and Embedded Systems.ORCID iD: 0000-0003-0061-3475
Show others and affiliations
2015 (English)Manuscript (preprint) (Other academic)
Place, publisher, year, edition, pages
National Category
Engineering and Technology
URN: urn:nbn:se:kth:diva-169546OAI: diva2:822107

Manuscript submitted for publication

QS 201506

Available from: 2015-06-16 Created: 2015-06-16 Last updated: 2015-10-09Bibliographically approved
In thesis
1. Ultra-low-power Design and Implementation of Application-specific Instruction-set Processors for Ubiquitous Sensing and Computing
Open this publication in new window or tab >>Ultra-low-power Design and Implementation of Application-specific Instruction-set Processors for Ubiquitous Sensing and Computing
2015 (English)Doctoral thesis, comprehensive summary (Other academic)
Abstract [en]

The feature size of transistors keeps shrinking with the development of technology, which enables ubiquitous sensing and computing. However, with the break down of Dennard scaling caused by the difficulties for further lowering supply voltage, the power density increases significantly. The consequence is that, for a given power budget, the energy efficiency must be improved for hardware resources to maximize the performance. Application-specific integrated circuits (ASICs) obtain high energy efficiency at the cost of low flexibility for various applications, while general-purpose processors (GPPs) gain generality at the expense of efficiency.

To provide both high energy efficiency and flexibility, this dissertation explores the ultra-low-power design of application-specific instruction-set processors (ASIP) for ubiquitous sensing and computing. Two application scenarios, i.e. high-throughput compute-intensive processing for multimedia and low-throughput low-cost processing for Internet of Things (IoT) are implemented in the proposed ASIPs.

Multimedia stream processing for human-computer interaction is always featured with high data throughput. To design processors for networked multimedia streams, customizing application-specific accelerators controlled by the embedded processor is exploited. By abstracting the common features from multiple coding algorithms, video decoding accelerators are implemented for networked multi-standard multimedia stream processing. Fabricated in 0.13 $\mu$m CMOS technology, the processor running at 216 MHz is capable of decoding real-time high-definition video streams with power consumption of 414 mW.

When even higher throughput is required, such as in multi-view video coding applications, multiple customized processors will be connected with an on-chip network. Design problems are further studied for selecting the capability of single processors, the number of processors, the capacity of communication network, as well as the task assignment schemes.

In the IoT scenario, low processing throughput but high energy efficiency and adaptability are demanded for a wide spectrum of devices. In this case, a tile processor including a multi-mode router and dual cores is proposed and implemented. The multi-mode router supports both circuit and wormhole switching to facilitate inter-silicon extension for providing on-demand performance. The control-centric dual-core architecture uses control words to directly manipulate all hardware resources. Such a mechanism avoids introducing complex control logics, and the hardware utilization is increased. Programmable control words enable reconfigurability of the processor for supporting general-purpose ISAs, application-specific instructions and dedicated implementations. The idea of reducing global data transfer also increases the energy efficiency. Finally, a single tile processor together with network of bare dies and network of packaged chips has been demonstrated as the result. The processor implemented in 65 nm low leakage CMOS technology and achieves the energy efficiency of 101.4 GOPS/W for each core.

Place, publisher, year, edition, pages
Stockholm: KTH Royal Institute of Technology, 2015. xvi, 74 p.
, TRITA-ICT, ISSN 1653-6363 ; 15:11
National Category
Computer Systems
urn:nbn:se:kth:diva-174896 (URN)978-91-7595-692-3 (ISBN)
Public defence
2015-11-04, Sal B, Electrum 229, Kista, 10:00 (English)

QC 20151009

Available from: 2015-10-09 Created: 2015-10-08 Last updated: 2015-10-09Bibliographically approved

Open Access in DiVA

No full text

Search in DiVA

By author/editor
Ma, NingZou, ZhuoLu, ZhonghaiZheng, Lirong
By organisation
Industrial and Medical ElectronicsElectronics and Embedded Systems
Engineering and Technology

Search outside of DiVA

GoogleGoogle Scholar
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 51 hits
ReferencesLink to record
Permanent link

Direct link