Change search
ReferencesLink to record
Permanent link

Direct link
Cracking Assessment of Concrete Slab Frame Bridges Exposed to Thermally Induced Restraint Forces
KTH, School of Architecture and the Built Environment (ABE), Civil and Architectural Engineering, Concrete Structures.
KTH, School of Architecture and the Built Environment (ABE), Civil and Architectural Engineering, Concrete Structures.
2015 (English)Independent thesis Advanced level (degree of Master (Two Years)), 20 credits / 30 HE creditsStudent thesisAlternative title
Utvärdering av sprickor i plattrambroar av betong utsatta för termiska tvångskrafter (Swedish)
Abstract [en]

The usage of linear 3D FEA is widespread within the bridge design community, and although this tool provides substantial benefits in the design process, there are certain practical issues related to the application of this analysis tool. A situation in which such an issue prevails is when linear 3D FEA is used to analyze restraint forces due to thermal shrinkage or expansion in concrete slab frame bridges. Effects related to restraint forces in concrete are difficult to model and predict as these forces differ significantly in nature from external loads, and dealing with them in practical design situations is complicated.

In this thesis, cracking due to restraint forces in concrete slab frame bridges was investigated using 3D non-linear FE-analyses in the software package ATENA 3D. Using volumetric finite elements, attempts were made to realistically capture the load response and cracking behavior of concrete slab frame bridges subjected to restraint forces induced by temperature differences among members.

The initial parts of this thesis aims to find appropriate modelling techniques and material models for the prediction of cracks due to restraint forces in base restrained walls using a previously reported experimental research project as reference. Comparative simulations were performed, using crack widths and crack patterns as comparate. Overall good correspondence was obtained with an exception of deviation in cracks formed at locations near the restrained corners where crack widths were overestimated in the simulations. The technique used to model the restrained boundary proved to be highly influential in the context of obtaining realistic results. Subsequent to the comparative study, a parametric study was performed where the correlation between crack widths and selected attributes was investigated. The parameter which exhibited the most distinct influential effect on the results was the length-to-height (L/H) ratio of the wall.

The applicability of a crack control approach intended for crack width estimation in liquid retaining and containment structures made of concrete exposed to thermally induced restraint forces, given in EN 1992-3, was then evaluated for use in design of concrete frame bridges. This approach proved to return conservative results for walls with low L/H-ratios when compared to results produced in the numerical simulations.

Finally, a NLFE (non-linear finite element) model of a concrete slab frame bridge designed by the consultancy company Tyréns AB was composed and tested. Different procedures of applying temperature differences between front wall and bridge deck were evaluated. This study indicated that the width of cracks induced by lateral restraint forces decreased when temperature was modelled applying a discrete thermal gradient to members in contact with back filling material compared to using a uniform temperature in these members when temperature differences between bridge deck and wall was simulated. The interacting effects of permanent external load effects and restraint forces were also investigated. Crack widths from NLFE simulations were then compared with corresponding results calculated using linear FEA results as input for design equations given in EN 1992-1-1. The latter resulted in estimated cracks more than 10 times wider than that obtained in the simulations, while crack widths predicted using the EN 1992-3 approach showed better correspondence to the NLFE results.

Place, publisher, year, edition, pages
2015. , 139 p.
TRITA-BKN-Examensarbete, ISSN 1103-4297 ; 448
Keyword [en]
Concrete slab frame bridges, Restraint forces, Thermal actions, Non linear FE analysis
National Category
Civil Engineering
URN: urn:nbn:se:kth:diva-169588OAI: diva2:823015
Subject / course
Concrete Structures
Educational program
Master of Science in Engineering - Urban Management
Available from: 2015-06-25 Created: 2015-06-17 Last updated: 2015-06-25Bibliographically approved

Open Access in DiVA

fulltext(24203 kB)412 downloads
File information
File name FULLTEXT01.pdfFile size 24203 kBChecksum SHA-512
Type fulltextMimetype application/pdf

By organisation
Concrete Structures
Civil Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 412 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 526 hits
ReferencesLink to record
Permanent link

Direct link