Change search
ReferencesLink to record
Permanent link

Direct link
Oxy-fuel combustion of pulverized fuels: Combustion fundamentals and modeling
KTH, School of Chemical Science and Engineering (CHE), Chemical Engineering and Technology, Energy Processes. Mälardalen University, Sweden.
2016 (English)In: Applied Energy, ISSN 0306-2619, E-ISSN 1872-9118, Vol. 162, 742-762 p.Article in journal (Refereed) PublishedText
Abstract [en]

Oxy-fuel combustion of pulverized fuels (PF), as a promising technology for CO2 capture from power plants, has gained a lot of concerns and also advanced considerable research, development and demonstration in the past years worldwide. The use of CO2 or the mixture of CO2 and H2O vapor as the diluent in oxy-fuel combustion, instead of N2 in conventional air-fuel combustion, induces significant changes to the combustion fundamentals, because of the great differences in the physical properties and chemical effects of the different diluents. Therefore, some fundamental issues and technological challenges need to be properly addressed to develop oxy-fuel combustion into an enabled technology. Computational Fluid Dynamics (CFD) modeling, which has been proven to be a very useful and cost-effective tool in research and development of conventional air-fuel combustion, is expected to play a similarly vital role in future development of oxy-fuel combustion technology. The paper presents a state-of-the-art review and an in-depth discussion of PF oxy-fuel combustion fundamentals and their modeling, which underpin the development of this promising technology. The focus is placed on the key issues in combustion physics (e.g., turbulent gas-solid flow, heat and mass transfer) and combustion chemistry (e.g., pyrolysis, gas phase combustion and char reactions), mainly on how they are affected in oxy-fuel conditions and how they are modeled and implemented into CFD simulations. The system performance of PF oxy-fuel combustion is also reviewed. Finally, the current status of PF oxy-fuel combustion fundamentals and modeling is concluded and the research needs in these regards are suggested.

Place, publisher, year, edition, pages
Elsevier, 2016. Vol. 162, 742-762 p.
Keyword [en]
Air, Carbon, Carbon capture, Carbon dioxide, Combustion, Computational fluid dynamics, Cost effectiveness, Fuel storage, Heat radiation, Mass transfer, Pulverized fuel, Combustion chemistry, Computational fluid dynamics modeling, Oxy-fuel combustion technology, Oxyfuel combustion, Research and development, State-of-the art reviews, System performance, Technological challenges, Fuels, carbon dioxide, combustion, computational fluid dynamics, cost analysis, hydrogen, nitrogen, oxygen, performance assessment, power plant, pulverized fuel ash
National Category
Energy Engineering
Identifiers
URN: urn:nbn:se:kth:diva-180856DOI: 10.1016/j.apenergy.2015.10.149ScopusID: 2-s2.0-84946593349OAI: oai:DiVA.org:kth-180856DiVA: diva2:901774
Note

QC 20160209

Available from: 2016-02-09 Created: 2016-01-25 Last updated: 2016-02-09Bibliographically approved

Open Access in DiVA

No full text

Other links

Publisher's full textScopus

Search in DiVA

By author/editor
Yan, Jinyue
By organisation
Energy Processes
In the same journal
Applied Energy
Energy Engineering

Search outside of DiVA

GoogleGoogle Scholar
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Altmetric score

Total: 25 hits
ReferencesLink to record
Permanent link

Direct link