Change search
ReferencesLink to record
Permanent link

Direct link
Kinetic investigation of LiMn2O4 for rechargeable lithium batteries
KTH, Superseded Departments, Chemical Engineering and Technology.
2002 (English)Doctoral thesis, comprehensive summary (Other scientific)
Abstract [en]

This thesis is concerned with kinetic characterisation of theinsertion compound LiMn2O4, which is used as positive electrodematerial in rechargeable lithium batteries. Three different typesof electrode configurations have been investigated, namely singleparticles, thin films and composite electrodes. Differentelectrochemical techniques, i.e. linear sweep voltammetry (LSV),electrochemical impedance spectroscopy (EIS), potential step, andgalvanostatic experiments were applied under various experimentalconditions. The majority of the experimental data were analysedby relevant mathematical models used for describing the reactionsteps of insertion compounds.

It was concluded that a model based on interfacialcharge-transfer, solid-phase diffusion and an external iR-dropcould be fairly well fitted to LSV data measured on a singleelectrode system over a narrow range of sweep rates. However, itwas also found that the fitted parameter values vary greatly withthe characteristic length and the sweep rate. This indicates thatthe physical description used is too simple for explaining theelectrochemical responses measured over a large range of chargeand discharge rates.

EIS was found to be a well-suited technique for separatingtime constants for different physical processes in the insertionand extraction reaction. It was demonstrated that the impedanceresponse is strongly dependent on the current collector used.According to the literature, reasonable values of theexchange-current density and solid-phase diffusion coefficientwere determined for various states-of-discharge, temperatures andelectrolyte compositions. Experiments were carried out in bothliquid and gel electrolytes. A method which improves thedistinction between the time constants related to thematerial’s intrinsic properties and possible porous effectsis presented. The method was applied to composite electrodes.This method utilises, in addition to the impedance responsemeasured in front of the electrode, also the impedance measuredat the backside of the electrode.

Finally, the kinetics of a composite electrode was alsoinvestigated by in situ X-ray diffraction (in situ XRD) incombination with galvanostatic and potentiostatic experiments. Noevidence of lithium concentration gradients could be observedfrom XRD data, even at the highest rate applied (i.e. ~6C), thusexcluding solid-phase diffusion and also phase-boundary movement,as described by Fick’s law, as the ratelimiting step.

Key words:linear sweep voltammetry, electrochemicalimpedance spectroscopy, potential step, in situ X-raydiffraction, microelectrodes, electrode kinetics, LiMn2O4cathode, rechargeable lithium batteries

Place, publisher, year, edition, pages
Stockholm: Kemiteknik , 2002. , viii, 68 p.
Trita-KET, ISSN 1104-3466 ; 162
Keyword [en]
linear sweep voltammetry, electrochemical impedance spectroscopy, potential step, in situ X-ray diffraction, microelectrodes, electrode kinetics, LiMn2O4 cathode, rechargeable lithium batteries
URN: urn:nbn:se:kth:diva-3429ISBN: OAI: diva2:9227
Public defence
NR 20140805Available from: 2002-11-14 Created: 2002-11-14Bibliographically approved

Open Access in DiVA

fulltext(4850 kB)1300 downloads
File information
File name FULLTEXT01.pdfFile size 4850 kBChecksum SHA-1
Type fulltextMimetype application/pdf

By organisation
Chemical Engineering and Technology

Search outside of DiVA

GoogleGoogle Scholar
Total: 1300 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 770 hits
ReferencesLink to record
Permanent link

Direct link