Change search
ReferencesLink to record
Permanent link

Direct link
A new laboratory methodology for optimization of mixture design of asphalt concrete containing reclaimed asphalt pavement material
KTH, School of Architecture and the Built Environment (ABE), Civil and Architectural Engineering, Building Materials. Carleton University, Ottawa, Canada; Swiss Federal Laboratories for Materials Science and Technology, Dübendorf, Switzerland.
2016 (English)In: Materials and Structures, ISSN 1359-5997, E-ISSN 1871-6873, Vol. 49, no 12, 4975-4990 p.Article in journal (Refereed) PublishedText
Abstract [en]

The reduction of virgin bitumen added to asphalt mixtures containing Reclaimed Asphalt Pavement (RAP) is based on the typical assumption that all the aged binder function in the same way as the virgin binder. However, recent studies conducted by the authors for a specific case show that a blend or mobilization of RAP binder are negligible. The aged bitumen becomes softer acting as glue facilitating cluster formation between small-size RAP particles. The reduction of small-size particles causes changes in the target grading curve and in the voids-fill, affecting the compactability of RAP mixtures. Therefore the target grading curve of RAP mixtures needs to be readjusted, using different proportions of virgin aggregates and taking into account the cluster phenomenon. The objective of this paper is to develop a new mix design approach for RAP mixtures, taking into account the cluster phenomenon and the contribution of the aged bitumen in the compactability. The virgin aggregates, filler and RAP are investigated and individually included in the calculation. 3D images of the virgin aggregates allowed the determination of new surface area factors; the concept of critical filler concentration led to the definition of the minimum bitumen quantity required to maintain the mastic in a diluted state and fill the voids. A RAP clustering model was introduced to predict the agglomeration of small-size RAP particles. The readjustment of the target grading curve was analytically calculated, allowing the correct estimation of the amount of virgin bitumen to be added to asphalt mixtures. Finally, a first verification of the entire process was carried out performing laboratory tests. These promising results enable the challenge of a new mix design optimization for HMA with high RAP content to be addressed.

Place, publisher, year, edition, pages
Kluwer Academic Publishers, 2016. Vol. 49, no 12, 4975-4990 p.
Keyword [en]
Clustering, Filler, Mineral aggregates, Mix design, RAP, Specific surface area
National Category
Infrastructure Engineering
URN: urn:nbn:se:kth:diva-187281DOI: 10.1617/s11527-016-0837-1ISI: 000380236800005ScopusID: 2-s2.0-84959477506OAI: diva2:929846

QC 20160902

Available from: 2016-05-20 Created: 2016-05-19 Last updated: 2016-09-02Bibliographically approved

Open Access in DiVA

No full text

Other links

Publisher's full textScopus

Search in DiVA

By author/editor
Partl, Manfred N.
By organisation
Building Materials
In the same journal
Materials and Structures
Infrastructure Engineering

Search outside of DiVA

GoogleGoogle Scholar
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Altmetric score

Total: 20 hits
ReferencesLink to record
Permanent link

Direct link