Change search
ReferencesLink to record
Permanent link

Direct link
Development and Characterisation of Cathode Materials for the Molten Carbonate Fuel Cell
KTH, Superseded Departments, Materials Science and Engineering.
2004 (English)Doctoral thesis, comprehensive summary (Other scientific)
Abstract [en]

Among the obstacles for the commercialization of the MoltenCarbonate Fuel Cell (MCFC), the dissolution of thestate-of-the-art lithiated NiO cathode is considered as aprimary lifetime limiting constraint. Development ofalternative cathode materials is considered as a main strategyfor solving the cathode dissolution problem. LiFeO2and LiCoO2had earlier been reported as the most promisingalternative materials; however, they could not satisfactorilysubstitute the lithiated NiO. On the other hand, ternarycompositions of LiFeO2, LiCoO2and NiO are expected to combine some desirableproperties of each component. The aim of this work was todevelop alternative cathode materials for MCFC in the LiFeO2-LiCoO2-NiO ternary system. It was carried out byinvestigating electronic conductivity of the materials, firstin the form of bulk pellets and then in ex-situ sinteredporous-gas-diffusion cathodes, and evaluating theirelectrochemical performance by short-time laboratory-scale celloperations.

Materials in the LiFeO2-NiO binary system and five ternary sub-systems,each with a constant molar ratio of LiFeO2:NiO while varying LiCoO2content, were studied. Powders withcharacteristics appropriate for MCFC cathode fabrication couldbe obtained by the Pechini method. The particle size of LiFeO2-LiCoO2-NiO powders considerably depends on thecalcination temperature and the material composition. Theelectrical conductivity study reveals the ability of preparingLiFeO2-LiCoO2-NiO materials with adequate electricalconductivity for MCFC cathode application.

A bimodal pore structure, appropriate for the MCFC cathode,could be achieved in sintered cathodes prepared usingporeformers and sub-micron size powder. Further, this studyindicates the nature of the compromise to be made between theelectrical conductivity, phase purity, pore structure andporosity in optimization of cathodes for MCFC application. Cellperformance comparable to that expected for the cathode in acommercial MCFC could be achieved with cathodes prepared from20 mole% LiFeO2- 20 mole% LiCoO2- 60 mole% NiO ternary composition. It shows aniR-corrected polarization of 62 mV and a iR-drop of 46 mV at acurrent density of 160 mAcm-2at 650 °C. Altogether, this study revealsthe possibility of preparing LiFeO2-LiCoO2-NiO cathode materials suitable for MCFCapplication.

Keywords: molten carbonate fuel cell (MCFC), MCFC cathode,LiFeO2-LiCoO2-NiO ternary compositions, electrical conductivity,porous gas diffusion electrodes, polarization, electrochemicalperformance, post-cell characterization.

Place, publisher, year, edition, pages
Stockholm: Materialvetenskap , 2004. , x, 43 p.
Keyword [en]
molten carbonate fuel cell (MCFC), MCFC cathode, LiFeO2-LiCoO2-NiO ternary compositions, electrical conductivity, porous gas diffusion electrodes, polarization, electrochemical performance, post-cell characterization
URN: urn:nbn:se:kth:diva-3811ISBN: 91-7283-746-2OAI: diva2:9666
Public defence
2004-06-15, 00:00
Available from: 2004-06-14 Created: 2004-06-14 Last updated: 2012-03-22

Open Access in DiVA

fulltext(6428 kB)1699 downloads
File information
File name FULLTEXT01.pdfFile size 6428 kBChecksum SHA-1
Type fulltextMimetype application/pdf

Search in DiVA

By author/editor
Wijayasinghe, Athula
By organisation
Materials Science and Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 1699 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 399 hits
ReferencesLink to record
Permanent link

Direct link