kth.sePublications KTH
Change search
Link to record
Permanent link

Direct link
Erlingsson, SigurdurORCID iD iconorcid.org/0000-0002-4256-3034
Publications (10 of 50) Show all publications
Afridi, M. A. & Erlingsson, S. (2026). Application of machine learning techniques for predicting municipal pavement condition index. In: TRPRO_12th BCRRA 26: . Paper presented at 12th International Conference on Bearing Capacity of Roads, Railways, and Airfields, BCRRA 2026, Ljubljana, SVN, Jun 22-24 2026 (pp. 889-897). Elsevier BV, 99
Open this publication in new window or tab >>Application of machine learning techniques for predicting municipal pavement condition index
2026 (English)In: TRPRO_12th BCRRA 26, Elsevier BV , 2026, Vol. 99, p. 889-897Conference paper, Published paper (Refereed)
Abstract [en]

Machine learning (ML) is becoming a powerful tool for forecasting pavement performance and enhancing the efficiency of maintenance and resource planning. This study investigates the application of machine learning, using the random forest (RF) algorithm, to predict pavement condition index (PCI) over time. Manually assessed data from 2014 and 2018 were used to forecast the PCI for 2022, allowing the model to capture deterioration patterns across residential and non-residential streets in Skellefteå Municipality, Sweden. Model performance was evaluated using several performance metrics to assess flexibility and generalization across a diverse set of input variables, including pavement age (A), several distress mechanisms (D), previous PCI rating (S), and traffic data (T). For non-residential streets, models were further grouped by surface treatment type to evaluate RF’s predictive accuracy under varying maintenance conditions. Among residential street models, the RF model using A+D+S achieved the best results, with an R² of 0.78 and a correlation coefficient of 0.89 using the combined 2014 and 2018 dataset. For non-residential streets, incorporating traffic variables (T) further improved accuracy, with the RF(A+D+S+T) model reaching an R² of 0.79 and a correlation coefficient (ρ) of 0.88. While performance varied slightly across treatment types, the PCI rating assessed in 2018 (Status2018) and the weighted distress value (WDV) emerged as the strongest predictors. Furthermore, using the combined dataset (2014 and 2018) did not significantly improve prediction accuracy over using 2018 data alone. The findings demonstrate that RF models can effectively predict PCI and enhance decision-making in municipal pavement management.

Place, publisher, year, edition, pages
Elsevier BV, 2026
Keywords
machine learning prediction models, maintenance treatments, municipal street maintenance, pavement condition, random forest
National Category
Infrastructure Engineering
Identifiers
urn:nbn:se:kth:diva-390168 (URN)10.1016/j.trpro.2026.07.130 (DOI)2-s2.0-105051208089 (Scopus ID)
Conference
12th International Conference on Bearing Capacity of Roads, Railways, and Airfields, BCRRA 2026, Ljubljana, SVN, Jun 22-24 2026
Note

QC 20261005

Available from: 2026-10-05 Created: 2026-10-05 Last updated: 2026-10-05Bibliographically approved
C. Everton, J. H. & Erlingsson, S. (2026). Characterising the resilient behaviour of unsaturated sandy soils under suction-controlled tests. Road Materials and Pavement Design, 27(1), 102-124
Open this publication in new window or tab >>Characterising the resilient behaviour of unsaturated sandy soils under suction-controlled tests
2026 (English)In: Road Materials and Pavement Design, ISSN 1468-0629, E-ISSN 2164-7402, Vol. 27, no 1, p. 102-124Article in journal (Refereed) Published
Abstract [en]

This study investigates the influence of moisture and suction on the resilient modulus (MR) of subgrade soils. The research employs suction-controlled Repeated Load Triaxial (RLT) tests on three sandy materials with varying fines content. The soil water retention curves (SWRC) for the three materials were obtained and allowed expediting suction equilibrium outside the triaxial chamber by controlling the water loss and thus inferring the yielded suction with the SWRC parameters. The results show that MR increases with lower moisture content and higher suction. Two stress-based models and two moisture-based models are evaluated for predicting MR. The findings indicate that stress-suction models provide a good fit for the silty sands, but only the model where suction is an independent variable suits all tested materials. Additionally, a proposed suction-based model demonstrates promising results. Overall, the study highlights the importance of considering both moisture and suction for accurate MR characterisation of subgrade soils.

Place, publisher, year, edition, pages
Informa UK Limited, 2026
Keywords
Subgrade soils, resilient modulus, moisture content, suction, repeated load triaxial testing, soil water retention curve
National Category
Soil Science
Identifiers
urn:nbn:se:kth:diva-363668 (URN)10.1080/14680629.2025.2480249 (DOI)001462144700001 ()2-s2.0-105002238885 (Scopus ID)
Note

QC 20260123

Available from: 2025-06-02 Created: 2025-06-02 Last updated: 2026-01-23Bibliographically approved
Bidgoli, M. A. & Erlingsson, S. (2026). Continuous deflection monitoring of flexible pavement under varying environmental conditions using embedded sensors. The international journal of pavement engineering, 27(1), Article ID 2745034.
Open this publication in new window or tab >>Continuous deflection monitoring of flexible pavement under varying environmental conditions using embedded sensors
2026 (English)In: The international journal of pavement engineering, ISSN 1029-8436, E-ISSN 1477-268X, Vol. 27, no 1, article id 2745034Article in journal (Refereed) Published
Abstract [en]

This study investigates the influence of pavement temperature on deflection measurements obtained from embedded geophones and accelerometers installed in an instrumented flexible pavement section on the E16 motorway in Borlänge, Sweden. The analysis is based on case-wise heavy-vehicle passages recorded during a continuous monitoring period spanning Autumn 2024 to Summer 2025, encompassing a wide range of axle configurations, gross vehicle weights, travel speeds, and near-surface pavement temperatures ranging from approximately −11 °C to over 24 °C. Vibration velocity and acceleration signals were processed to estimate peak pavement surface deflections, which were subsequently normalised by load and related to pavement temperature using correlation analysis, one-way ANOVA, and regression modelling. Two empirical temperature–deflection correction models, linear and exponential, were developed to normalise deflections to a reference temperature. Both models significantly reduced temperature-induced variability in the measured deflections; however, the exponential model provided more effective overall correction, consistent with the nonlinear temperature-dependent stiffness behaviour of asphalt materials. Temperature-corrected deflections showed substantially improved agreement with multilayer elastic responses computed using the ERAPave software, with coefficients of determination reaching approximately 0.86 and normalised RMSE values reduced to less than 10% after exponential correction. The results demonstrate that embedded geophones or accelerometers, when combined with appropriate temperature normalisation, can enable accurate, year-round pavement response monitoring at traffic speed in cold and seasonally variable climates.

Place, publisher, year, edition, pages
Informa UK Limited, 2026
Keywords
ERAPave, Pavement deflection monitoring, accelerometers, cold-climate pavements, geophones, temperature correction
National Category
Infrastructure Engineering Geotechnical Engineering and Engineering Geology
Identifiers
urn:nbn:se:kth:diva-391603 (URN)10.1080/10298436.2026.2745034 (DOI)001897605000001 ()2-s2.0-105052981783 (Scopus ID)
Note

QC 20261029

Available from: 2026-10-29 Created: 2026-10-29 Last updated: 2026-10-29Bibliographically approved
Bidgoli, M. A. & Erlingsson, S. (2026). Experimental validation of continuous pavement surface deflection measurement using embedded geophones and accelerometers. The international journal of pavement engineering, 27(1), Article ID 2625850.
Open this publication in new window or tab >>Experimental validation of continuous pavement surface deflection measurement using embedded geophones and accelerometers
2026 (English)In: The international journal of pavement engineering, ISSN 1029-8436, E-ISSN 1477-268X, Vol. 27, no 1, article id 2625850Article in journal (Refereed) Published
Abstract [en]

Pavement response monitoring (PRM) supports infrastructure management by evaluating pavement performance and optimizing maintenance strategies. This study experimentally validates a continuous PRM system using embedded geophones and accelerometers to measure pavement surface deflections under real traffic loads. The system is designed as a cost-effective and easy-to-install solution for continuous pavement deflection monitoring. Field experiments were conducted on the E16 Motorway in Borlänge, Sweden, a cold-climate region, where sensor signals were collected from passing heavy vehicles. Geophones and accelerometers measured pavement vertical vibration velocity and acceleration, respectively. Signal processing methods, including filtering, integration, and transformation, were applied to derive vertical pavement surface deflections. Measured deflections were compared with theoretical values calculated using the multilayer elastic response software ERAPave, showing low normalized root mean square error (NRMSE). Both sensor types accurately captured pavement surface deflections; however, geophones performed better, with an average NRMSE of 9.87% compared to 11.92% for accelerometers. Geophone measurements also showed close alignment between measured and calculated peak deflections, achieving an R² of 80%. This validation confirms the potential of embedded geophone and accelerometer setups as scalable, low-cost solutions for continuous PRM to support roadway maintenance and infrastructure durability.

Place, publisher, year, edition, pages
Informa UK Limited, 2026
Keywords
accelerometer, embedded sensors, ERAPave, geophone, Pavement deflection, signal processing
National Category
Infrastructure Engineering
Identifiers
urn:nbn:se:kth:diva-377152 (URN)10.1080/10298436.2026.2625850 (DOI)001680668600001 ()2-s2.0-105029162755 (Scopus ID)
Note

QC 20260225

Available from: 2026-02-25 Created: 2026-02-25 Last updated: 2026-02-25Bibliographically approved
Afridi, M. A. & Erlingsson, S. (2026). Forecasting municipal pavement condition index through sigmoid deterioration model. In: TRPRO_12th BCRRA 26: . Paper presented at 12th International Conference on Bearing Capacity of Roads, Railways, and Airfields, BCRRA 2026, Ljubljana, SVN, Jun 22-24 2026 (pp. 880-888). Elsevier BV, 99
Open this publication in new window or tab >>Forecasting municipal pavement condition index through sigmoid deterioration model
2026 (English)In: TRPRO_12th BCRRA 26, Elsevier BV , 2026, Vol. 99, p. 880-888Conference paper, Published paper (Refereed)
Abstract [en]

This study investigates the application of a sigmoidal deterioration model with separate regression parameter sets to estimate the pavement condition index ( PCI ) for 2022 across both residential and non-residential streets—including main, collector and industrial roads—in Skellefteå Municipality, Sweden. Separate best-fit sigmoid curves were also developed for various pavement maintenance treatments applied to non-residential streets. The analysis is based on data gathered through windshield surveys conducted in 2014, 2018 and 2022. The findings reveal that the sigmoidal model exhibited poor performance for residential streets, with low R ² values and weak correlations between predicted and observed PCI ratings—probably due to inconsistent pavement age and disruptions such as utility cuts within segments. Conversely, the model demonstrated strong predictive accuracy for non-residential streets, with high correlations and low prediction errors. Moreover, the sigmoid curve for pavements treated with surface levelling (SL) yielded the highest prediction accuracy, followed by sigmoid curves for surface treatment (ST) and for milling and resurfacing (MR) treated pavements, which showed moderate performance. Given its cost-efficiency, SL treatment is recommended for addressing early-stage deterioration, while MR may be more appropriate for extending pavement life, offering a balance between cost and predictive strength. The study offers insights to enhance timely, proactive, data-driven pavement maintenance in municipalities.

Place, publisher, year, edition, pages
Elsevier BV, 2026
Keywords
municipal street maintenance, pavement condition index, pavement deterioration, predictive modelling, sigmoid model
National Category
Infrastructure Engineering
Identifiers
urn:nbn:se:kth:diva-390165 (URN)10.1016/j.trpro.2026.07.129 (DOI)2-s2.0-105051192416 (Scopus ID)
Conference
12th International Conference on Bearing Capacity of Roads, Railways, and Airfields, BCRRA 2026, Ljubljana, SVN, Jun 22-24 2026
Note

QC 20261012

Available from: 2026-10-12 Created: 2026-10-12 Last updated: 2026-10-12Bibliographically approved
Afridi, M. A. & Erlingsson, S. (2026). Predicting a pavement condition index for municipal streets using a sigmoid deterioration model. Frontiers in Built Environment, 12, Article ID 1808188.
Open this publication in new window or tab >>Predicting a pavement condition index for municipal streets using a sigmoid deterioration model
2026 (English)In: Frontiers in Built Environment, E-ISSN 2297-3362, Vol. 12, article id 1808188Article in journal (Refereed) Published
Abstract [en]

This study applies sigmoidal models to predict pavement condition index (PCI) deterioration over time for residential and non-residential (main, collector and industrial) streets using pavement condition data from Skellefteå Municipality, Sweden. The dataset includes windshield-survey pavement assessments conducted in 2014, 2018 and 2022. Two modelling configurations were applied: temporal models calibrated using 2014 and 2018 observations to predict 2022 PCI ratings, and full dataset models developed using all available observations to represent overall deterioration behaviour. Separate sigmoidal curves were developed for residential and non-residential streets, as well as for the specific maintenance-treatment categories applied exclusively to non-residential streets. Sigmoidal curves for residential streets showed lower predictive performance and higher variability, potentially associated with heterogeneous pavement conditions, inconsistent pavement age and localized utility cuts, whereas sigmoidal curves for non-residential streets demonstrated comparatively better predictive capability due to more consistent deterioration patterns. Model performance also varied across maintenance-treated pavement surfaces, partly due to limited sample sizes. Sigmoid best-fit curves for street pavements treated with special treatments (ST) showed the highest predictive performance, while milling and resurfacing (MR)-treated pavements demonstrated relatively good agreement with measured PCI ratings. Surface levelling (SL) is a relatively low-cost treatment and may be suitable for earlier stages of deterioration, although traffic and pavement characteristics should also be considered when selecting treatments. Differences in unit cost between treatment types are considered only for contextual interpretation. Overall, sigmoidal curves may support more timely maintenance planning in data-limited municipal pavement management and reduce the need for major reconstruction.

Place, publisher, year, edition, pages
Frontiers Media SA, 2026
Keywords
municipalities, pavement condition index, performance prediction, sigmoid model, street maintenance
National Category
Infrastructure Engineering Probability Theory and Statistics
Identifiers
urn:nbn:se:kth:diva-387905 (URN)10.3389/fbuil.2026.1808188 (DOI)001851383600001 ()2-s2.0-105047798390 (Scopus ID)
Note

Not duplicate with DiVA 2008751

QC 20260907

Available from: 2026-09-07 Created: 2026-09-07 Last updated: 2026-09-07Bibliographically approved
Larsson, M., Niska, A. & Erlingsson, S. (2026). Structural distress of cycle paths–the effect of heavy loading and groundwater table in full-scale testing. Road Materials and Pavement Design, 27(7), 2166-2188
Open this publication in new window or tab >>Structural distress of cycle paths–the effect of heavy loading and groundwater table in full-scale testing
2026 (English)In: Road Materials and Pavement Design, ISSN 1468-0629, E-ISSN 2164-7402, Vol. 27, no 7, p. 2166-2188Article in journal (Refereed) Published
Abstract [en]

Assuring sufficient structural stability of cycle paths is important to avoid distress. Being thin and narrow structures, they are highly susceptible to edge cracking by passings of heavy vehicles. Two important factors that affect distress are lack of lateral support at the edge and increased moisture content in the unbound granular materials. Three full-scale instrumented cycle path structures with different structural design were constructed in a concrete pit at a test facility. Response measurements were conducted with a falling weight deflectometer, a light weight deflectometer, and light, standard and heavy maintenance vehicles at three different groundwater table scenarios. The results confirm reduced load-bearing capacity close to the edge, and at an increased groundwater table. In general, larger transverse tensile strains can also be expected in the asphalt layer close to the edge.

Place, publisher, year, edition, pages
Informa UK Limited, 2026
Keywords
Cycle paths, edge deformation, full-scale test, groundwater table, instrumentation, maintenance vehicles
National Category
Infrastructure Engineering
Identifiers
urn:nbn:se:kth:diva-369870 (URN)10.1080/14680629.2025.2542238 (DOI)001557620800001 ()2-s2.0-105014146418 (Scopus ID)
Note

QC 20260703

Available from: 2025-09-16 Created: 2025-09-16 Last updated: 2026-07-03Bibliographically approved
Bidgoli, M. A. & Erlingsson, S. (2026). Temperature-corrected pavement deflection measurement using embedded sensors. In: TRPRO_12th BCRRA 26: . Paper presented at 12th International Conference on Bearing Capacity of Roads, Railways, and Airfields, BCRRA 2026, Ljubljana, SVN, Jun 22-24 2026 (pp. 639-647). Elsevier BV, 99
Open this publication in new window or tab >>Temperature-corrected pavement deflection measurement using embedded sensors
2026 (English)In: TRPRO_12th BCRRA 26, Elsevier BV , 2026, Vol. 99, p. 639-647Conference paper, Published paper (Refereed)
Abstract [en]

This paper investigates the impact of pavement temperature on deflection measurements from embedded geophones and accelerometers under real-world heavy-vehicle traffic on the E16 motorway in Borlänge, Sweden. Heavy-vehicle passages were analyzed, covering a wide range of axle configurations, gross vehicle weights, speeds, and pavement temperatures from about 1 °C to more than 24 °C. Processed vibration velocity and acceleration signals were used to derive load-normalized surface deflections, which were related to near-surface pavement temperature using statistical and regression analyses. Linear and exponential temperature–deflection models were calibrated to normalize deflections to a data-driven reference temperature of +8 °C. Both models significantly reduced temperature-induced variability, with the exponential formulation providing the most reliable correction, consistent with the nonlinear stiffness–temperature behavior of asphalt concrete. Temperature-corrected deflections showed markedly improved agreement with multilayer elastic responses computed using ERAPave, with coefficients of determination up to 0.86 and normalized RMSE values near 12–17%. The results demonstrate that embedded geophones and accelerometers, when combined with appropriate temperature-normalization models, can provide accurate, traffic-speed, and year-round pavement deflection monitoring in cold and seasonally variable climates.

Place, publisher, year, edition, pages
Elsevier BV, 2026
Keywords
ERAPave, accelerometers, cold-climate pavements, geophones, pavement deflection, temperature correction
National Category
Infrastructure Engineering
Identifiers
urn:nbn:se:kth:diva-390164 (URN)10.1016/j.trpro.2026.07.100 (DOI)2-s2.0-105051173621 (Scopus ID)
Conference
12th International Conference on Bearing Capacity of Roads, Railways, and Airfields, BCRRA 2026, Ljubljana, SVN, Jun 22-24 2026
Note

QC 20261012

Available from: 2026-10-12 Created: 2026-10-12 Last updated: 2026-10-12Bibliographically approved
Larsson, M., Niska, A. & Erlingsson, S. (2026). The effect of heavy loading and groundwater table in full-scale testing of cycle paths. In: TRPRO_12th BCRRA 26: . Paper presented at 12th International Conference on Bearing Capacity of Roads, Railways, and Airfields, BCRRA 2026, Ljubljana, SVN, Jun 22-24 2026 (pp. 936-943). Elsevier BV, 99
Open this publication in new window or tab >>The effect of heavy loading and groundwater table in full-scale testing of cycle paths
2026 (English)In: TRPRO_12th BCRRA 26, Elsevier BV , 2026, Vol. 99, p. 936-943Conference paper, Published paper (Refereed)
Abstract [en]

Passings of heavy vehicles is a common cause of distress on thin and narrow cycle paths. The lack of lateral support at the edge and increased moisture content in the unbound granular materials are two important factors that affect deterioration. Three full-scale instrumented cycle path structures with different structural designs were constructed in a concrete pit at the Swedish National Road and Transport Research Institute (VTI) test facility. Response measurements were conducted with a falling weight deflectometer (FWD), a light weight deflectometer (LWD), and light, standard and heavy maintenance vehicles at three different groundwater table scenarios. The results confirm reduced load-bearing capacity close to the cycle path edge, and at an increased groundwater table. In general, larger transverse tensile strains can also be expected in the asphalt layer close to the edge.

Place, publisher, year, edition, pages
Elsevier BV, 2026
Keywords
Cycle paths, edge deformation, full-scale test, groundwater table, instrumentation, maintenance vehicles
National Category
Infrastructure Engineering
Identifiers
urn:nbn:se:kth:diva-390167 (URN)10.1016/j.trpro.2026.07.136 (DOI)2-s2.0-105051195133 (Scopus ID)
Conference
12th International Conference on Bearing Capacity of Roads, Railways, and Airfields, BCRRA 2026, Ljubljana, SVN, Jun 22-24 2026
Note

QC 20261012

Available from: 2026-10-12 Created: 2026-10-12 Last updated: 2026-10-12Bibliographically approved
Carvalho Everton, J. H. & Erlingsson, S. (2025). Characterising the permanent deformation of subgrade soils under seasonal variation. Canadian journal of civil engineering (Print), 52(3), 317-333
Open this publication in new window or tab >>Characterising the permanent deformation of subgrade soils under seasonal variation
2025 (English)In: Canadian journal of civil engineering (Print), ISSN 0315-1468, E-ISSN 1208-6029, Vol. 52, no 3, p. 317-333Article in journal (Refereed) Published
Abstract [en]

Rutting, a prevalent failure mode in flexible pavements, largely stems from subgrade issues. Despite this, there is a lack of standard protocols to evaluate subgrade rutting or permanent deformation (PD). This study attempted to characterise PD in subgrades, focusing on a poorly graded sand and two silty sands. Moisture contents above and below optimum levels were considered to account for seasonal variations. The research involved adapting a test to assess the PD by determining typical stresses on the subgrade. Moreover, given these soils’ unsaturated state and medium- to fine-grained nature, suction is an important factor. Suction-controlled multi-stage repeated load triaxial tests were conducted, and the results were fitted by a PD model modified to account for suction. The characterisation was compared with the subgrade strain criterion used in pavement design solutions. Results indicated discrepancies between the PD characterisation and strain criteria predictions, with the silty sands performing better than the poorly graded sand, consistent with the shakedown theory.

Place, publisher, year, edition, pages
Canadian Science Publishing, 2025
National Category
Infrastructure Engineering
Research subject
Civil and Architectural Engineering, Building Materials
Identifiers
urn:nbn:se:kth:diva-356003 (URN)10.1139/cjce-2024-0077 (DOI)001417087700001 ()2-s2.0-86000527173 (Scopus ID)
Funder
Swedish Transport Administration, TRV 2020/82023
Note

QC 20250327

Available from: 2024-11-07 Created: 2024-11-07 Last updated: 2025-10-08Bibliographically approved
Organisations
Identifiers
ORCID iD: ORCID iD iconorcid.org/0000-0002-4256-3034

Search in DiVA

Show all publications