kth.sePublikationer KTH
Driftinformation
Ett driftavbrott i samband med versionsuppdatering är planerat till 17/11-2026, kl 12.00-13.00. Under den tidsperioden kommer DiVA inte att vara tillgängligt.
Ändra sökning
Länk till posten
Permanent länk

Direktlänk
Publikationer (8 of 8) Visa alla publikationer
Mystek, K., Andreasson, B., Reid, M. S., Francon, H., Fager, C., Larsson, P. A., . . . Wågberg, L. (2023). The preparation of cellulose acetate capsules using emulsification techniques: High-shear bulk mixing and microfluidics. Nordic Pulp & Paper Research Journal, 38(4), 593-605
Öppna denna publikation i ny flik eller fönster >>The preparation of cellulose acetate capsules using emulsification techniques: High-shear bulk mixing and microfluidics
Visa övriga...
2023 (Engelska)Ingår i: Nordic Pulp & Paper Research Journal, ISSN 0283-2631, E-ISSN 2000-0669, Vol. 38, nr 4, s. 593-605Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

This work describes an emulsification-solvent-evaporation method for the preparation of liquid-filled capsules made from cellulose acetate. Two different emulsification techniques were applied: bulk emulsification by high-shear mixing, and droplet generation using microfluidics. The bulk emulsification method resulted in the formation of oil-in-water emulsions composed of an organic mixture of isooctane and cellulose acetate in methyl acetate, and an aqueous phase of high-molecular-weight polyvinyl alcohol (PVA). Upon the solvent evaporation, the emulsion droplets evolved into isooctane-filled cellulose acetate capsules. In contrast, microfluidics led to the formation of monodisperse droplets composed of the aqueous PVA solution dispersed in the organic phase. Upon the solvent evaporation, the emulsion droplets evolved into water-filled cellulose acetate capsules. Owing to the thermoplastic properties of the cellulose acetate, the capsules formed with the bulk mixing demonstrated a significant expansion when exposed to an increased temperature. Such expanded capsules hold great promise as building blocks in lightweight materials.

Ort, förlag, år, upplaga, sidor
Walter de Gruyter GmbH, 2023
Nyckelord
cellulose acetate, emulsions, low-density materials, partially modified cellulose
Nationell ämneskategori
Polymerkemi
Identifikatorer
urn:nbn:se:kth:diva-348232 (URN)10.1515/npprj-2023-0051 (DOI)001107486200001 ()2-s2.0-85177175566 (Scopus ID)
Anmärkning

QC 20240620

Tillgänglig från: 2024-06-20 Skapad: 2024-06-20 Senast uppdaterad: 2024-06-20Bibliografiskt granskad
Li, H., Kruteva, M., Dulle, M., Wang, Z., Mystek, K., Ji, W., . . . Wågberg, L. (2022). Understanding the Drying Behavior of Regenerated Cellulose Gel Beads: The Effects of Concentration and Nonsolvents. ACS Nano, 16(2), 2608-2620
Öppna denna publikation i ny flik eller fönster >>Understanding the Drying Behavior of Regenerated Cellulose Gel Beads: The Effects of Concentration and Nonsolvents
Visa övriga...
2022 (Engelska)Ingår i: ACS Nano, ISSN 1936-0851, E-ISSN 1936-086X, Vol. 16, nr 2, s. 2608-2620Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

The drying behavior of regenerated cellulose gel beads swollen with different nonsolvents (e.g., water, ethanol, water/ethanol mixtures) is studied in situ on the macroscopic scale with an optical microscope as well as on nanoscale using small-angle/wide-angle X-ray scattering (SAXS/WAXS) techniques. Depending on the cellulose concentration, the structural evolution of beads during drying follows one of three distinct regimes. First, when the cellulose concentration is lower than 0.5 wt %, the drying process comprises three steps and, regardless of the water/ethanol mixture composition, a sharp structural transition corresponding to the formation of a cellulose II crystalline structure is observed. Second, when the cellulose concentration is higher than 5.0 wt %, a two-step drying process is observed and no structural transition occurs for any of the beads studied. Third, when the cellulose concentration is between 0.5 and 5.0 wt %, the drying process is dependent on the nonsolvent composition. A three-step drying process takes place for beads swollen with water/ethanol mixtures with a water content higher than 20%, while a two-step drying process is observed when the water content is lower than 20%. To describe the drying behavior governed by the cellulose concentration and nonsolvent composition, a simplified phase diagram is proposed.

Ort, förlag, år, upplaga, sidor
American Chemical Society (ACS), 2022
Nyckelord
regenerated cellulose, gel bead, drying kinetics, nonsolvent, cellulose concentration
Nationell ämneskategori
Pappers-, massa- och fiberteknik
Identifikatorer
urn:nbn:se:kth:diva-311536 (URN)10.1021/acsnano.1c09338 (DOI)000776691400078 ()35104108 (PubMedID)2-s2.0-85124278208 (Scopus ID)
Anmärkning

QC 20220429

Tillgänglig från: 2022-04-29 Skapad: 2022-04-29 Senast uppdaterad: 2022-06-25Bibliografiskt granskad
Francon, H., Wang, Z., Marais, A., Mystek, K., Piper, A., Granberg, H., . . . Wågberg, L. (2020). Ambient-Dried, 3D-Printable and Electrically Conducting Cellulose Nanofiber Aerogels by Inclusion of Functional Polymers. Advanced Functional Materials, 30(12), Article ID 1909383.
Öppna denna publikation i ny flik eller fönster >>Ambient-Dried, 3D-Printable and Electrically Conducting Cellulose Nanofiber Aerogels by Inclusion of Functional Polymers
Visa övriga...
2020 (Engelska)Ingår i: Advanced Functional Materials, ISSN 1616-301X, E-ISSN 1616-3028, Vol. 30, nr 12, artikel-id 1909383Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

This study presents a novel, green, and efficient way of preparing crosslinked aerogels from cellulose nanofibers (CNFs) and alginate using non-covalent chemistry. This new process can ultimately facilitate the fast, continuous, and large-scale production of porous, light-weight materials as it does not require freeze-drying, supercritical CO2 drying, or any environmentally harmful crosslinking chemistries. The reported preparation procedure relies solely on the successive freezing, solvent-exchange, and ambient drying of composite CNF-alginate gels. The presented findings suggest that a highly-porous structure can be preserved throughout the process by simply controlling the ionic strength of the gel. Aerogels with tunable densities (23-38 kg m(-3)) and compressive moduli (97-275 kPa) can be prepared by using different CNF concentrations. These low-density networks have a unique combination of formability (using molding or 3D-printing) and wet-stability (when ion exchanged to calcium ions). To demonstrate their use in advanced wet applications, the printed aerogels are functionalized with very high loadings of conducting poly(3,4-ethylenedioxythiophene):tosylate (PEDOT:TOS) polymer by using a novel in situ polymerization approach. In-depth material characterization reveals that these aerogels have the potential to be used in not only energy storage applications (specific capacitance of 78 F g(-1)), but also as mechanical-strain and humidity sensors.

Ort, förlag, år, upplaga, sidor
Wiley, 2020
Nyckelord
aerogels, cellulose, nanofibers, organic electronics, poly(3, 4-ethylenedioxythiophene)
Nationell ämneskategori
Pappers-, massa- och fiberteknik
Identifikatorer
urn:nbn:se:kth:diva-300715 (URN)10.1002/adfm.201909383 (DOI)000510685400001 ()2-s2.0-85078930679 (Scopus ID)
Anmärkning

QC 20210903

Tillgänglig från: 2021-09-03 Skapad: 2021-09-03 Senast uppdaterad: 2023-03-01Bibliografiskt granskad
Li, H., Mystek, K., Wågberg, L. & Pettersson, T. (2020). Development of mechanical properties of regenerated cellulose beads during drying as investigated by atomic force microscopy. Soft Matter, 16(28), 6457-6462
Öppna denna publikation i ny flik eller fönster >>Development of mechanical properties of regenerated cellulose beads during drying as investigated by atomic force microscopy
2020 (Engelska)Ingår i: Soft Matter, ISSN 1744-683X, E-ISSN 1744-6848, Vol. 16, nr 28, s. 6457-6462Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

The mechanical properties as well as the size changes of swollen cellulose beads were measured in situ during solvent evaporation by atomic force microscopy (AFM) indentation measurement combined with optical microscopy. Three factors are proposed to govern the mechanical properties of the cellulose beads in the swollen state and during drying: (i) the cellulose concentration, (ii) the interaction between the cellulose entities, (iii) the heterogeneity of the network structure within the cellulose beads.

Ort, förlag, år, upplaga, sidor
ROYAL SOC CHEMISTRY, 2020
Nationell ämneskategori
Biomaterial
Identifikatorer
urn:nbn:se:kth:diva-278921 (URN)10.1039/d0sm00866d (DOI)000551334600022 ()32583840 (PubMedID)2-s2.0-85088492614 (Scopus ID)
Anmärkning

QC 20201118

Tillgänglig från: 2020-11-18 Skapad: 2020-11-18 Senast uppdaterad: 2024-03-15Bibliografiskt granskad
Mystek, K., Reid, M. S., Larsson, P. A. & Wågberg, L. (2020). In Situ Modification of Regenerated Cellulose Beads: Creating All-Cellulose Composites. Industrial & Engineering Chemistry Research, 59(7), 2968-2976
Öppna denna publikation i ny flik eller fönster >>In Situ Modification of Regenerated Cellulose Beads: Creating All-Cellulose Composites
2020 (Engelska)Ingår i: Industrial & Engineering Chemistry Research, ISSN 0888-5885, E-ISSN 1520-5045, Vol. 59, nr 7, s. 2968-2976Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Developing more sustainable products requires innovative ways to utilize and modify renewable resources. Here, a simple one-step in situ modification of regenerated cellulose beads using cellulose nanocrystals (CNC) and dropwise precipitation of cellulose/N,N-dimethylacetamide and lithium chloride (DMAc/LiCI) solution is presented. A more condensed internal structure and increased surface roughness were observed when higher CNC concentrations were used in the precipitation media. Incorporation of CNCs significantly reduces the water holding capacity of the beads and simultaneously impacts the kinetics of drying. Beads modified using the highest CNC concentration (0.5 wt %) exhibited a reduction in the Young modulus by more than 20% and an increase in compressibility to failure by 10% compared with native beads. Overall, inclusion of nanoparticles during bead formation is a simple method that can tune the mechanical, structural, and swelling/drying behavior of cellulose beads and broaden their potential for different end-use applications such as separations and controlled release.

Ort, förlag, år, upplaga, sidor
AMER CHEMICAL SOC, 2020
Nationell ämneskategori
Polymerkemi
Identifikatorer
urn:nbn:se:kth:diva-271717 (URN)10.1021/acs.iecr.9b06273 (DOI)000515213800032 ()2-s2.0-85080933348 (Scopus ID)
Anmärkning

QC 20200408

Tillgänglig från: 2020-04-08 Skapad: 2020-04-08 Senast uppdaterad: 2022-06-26Bibliografiskt granskad
Li, H., Kruteva, M., Mystek, K., Dulle, M., Ji, W., Pettersson, T. & Wågberg, L. (2020). Macro- and microstructural evolution during drying of regenerated cellulose beads. ACS Nano, 14(6), 6774-6784
Öppna denna publikation i ny flik eller fönster >>Macro- and microstructural evolution during drying of regenerated cellulose beads
Visa övriga...
2020 (Engelska)Ingår i: ACS Nano, ISSN 1936-0851, E-ISSN 1936-086X, Vol. 14, nr 6, s. 6774-6784Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

The macro- and microstructural evolution of water swollen and ethanol swollen regenerated cellulose gel beads have been determined during drying by optical microscopy combined with analytical balance measurements, small-angle X-ray scattering (SAXS), and wide-angle X-ray scattering (WAXS). Two characteristic length scales, which are related to the molecular dimension of cellulose monomer and elongated aggregates of these monomers, could be identified for both types of beads by SAXS. For ethanol swollen beads, only small changes to the structures were detected in both the SAXS and WAXS measurements during the entire drying process. However, the drying of cellulose from water follows a more complex process when compared to drying from ethanol. As water swollen beads dried, they went through a structural transition where elongated structures changed to spherical structures and their dimensions increased from 3.6 to 13.5 nm. After complete drying from water, the nanostructures were characterized as a combination of rodlike structures with an approximate size of cellulose monomers (0.5 nm), and spherical aggregates (13.5 nm) without any indication of heterogeneous meso- or microporosity. In addition, WAXS shows that cellulose II hydrate structure appears and transforms to cellulose II during water evaporation, however it is not possible to determine the degree of crystallinity of the beads from the present measurements. This work sheds lights on the structural changes that occur within regenerated cellulose materials during drying and can aid in the design and application of cellulosic materials as fibers, adhesives, and membranes.

Ort, förlag, år, upplaga, sidor
American Chemical Society (ACS), 2020
Nyckelord
cellulose, gel bead, drying structural evolution, X-ray scattering
Nationell ämneskategori
Polymerteknologi
Identifikatorer
urn:nbn:se:kth:diva-278617 (URN)10.1021/acsnano.0c00171 (DOI)000543744100036 ()32383585 (PubMedID)2-s2.0-85085690637 (Scopus ID)
Anmärkning

QC 20200729

Tillgänglig från: 2020-07-29 Skapad: 2020-07-29 Senast uppdaterad: 2022-06-26Bibliografiskt granskad
Mystek, K., Li, H., Pettersson, T., Francon, H., Svagan, A. J., Larsson, P. A. & Wågberg, L. (2020). Wet-expandable capsules made from partially modified cellulose. Green Chemistry, 22(14), 4581-4592
Öppna denna publikation i ny flik eller fönster >>Wet-expandable capsules made from partially modified cellulose
Visa övriga...
2020 (Engelska)Ingår i: Green Chemistry, ISSN 1463-9262, E-ISSN 1463-9270, Vol. 22, nr 14, s. 4581-4592Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Preparation of lightweight and biocompatible hollow capsules holds great promise for various advanced engineering applications. Here, we use a heterogeneously modified structure of cellulose, which on the molecular level increases the flexibility of the capsule shell, to form hollow capsules. These capsules expand in the wet state when they are exposed to an external stimulus, in the present case a decreased external pressure. The capsules were prepared by a dropwise precipitation of a propane-saturated solution of cellulose partially modified to dialcohol cellulose, dissolved in a mixture ofN,N-dimethylacetamide and lithium chloride, into a non-solvent. The mechanical properties of the capsules were determined by measuring the expansion of the capsules upon a controlled decrease in external pressure. In addition, indentation measurements using atomic force microscopy were used to independently quantify the moduli of the capsule walls. The results show that the wet, modified cellulose capsules are much softer and, upon the same pressure change, expand significantly more than those made from unmodified cellulose. The greatest expansion observed for the modified capsules was 1.9 times the original volume, which corresponds to a final density of the expanded capsules of about 14 kg m(-3). These capsules therefore hold great potential to form green and lightweight foam-like materials.

Ort, förlag, år, upplaga, sidor
ROYAL SOC CHEMISTRY, 2020
Nationell ämneskategori
Annan kemi
Identifikatorer
urn:nbn:se:kth:diva-278915 (URN)10.1039/d0gc01523g (DOI)000550567200018 ()2-s2.0-85089284846 (Scopus ID)
Anmärkning

QC 20201118

Tillgänglig från: 2020-11-18 Skapad: 2020-11-18 Senast uppdaterad: 2022-06-25Bibliografiskt granskad
Mystek, K., Larsson, P., Svagan, A. J. & Wågberg, L. (2019). Wet-expandable cellulose-based capsules. Paper presented at National Meeting of the American-Chemical-Society (ACS), MAR 31-APR 04, 2019, Orlando, FL. Abstracts of Papers of the American Chemical Society, 257
Öppna denna publikation i ny flik eller fönster >>Wet-expandable cellulose-based capsules
2019 (Engelska)Ingår i: Abstracts of Papers of the American Chemical Society, ISSN 0065-7727, Vol. 257Artikel i tidskrift, Meeting abstract (Övrigt vetenskapligt) Published
Ort, förlag, år, upplaga, sidor
AMER CHEMICAL SOC, 2019
Nationell ämneskategori
Pappers-, massa- och fiberteknik
Identifikatorer
urn:nbn:se:kth:diva-257605 (URN)000478860503028 ()
Konferens
National Meeting of the American-Chemical-Society (ACS), MAR 31-APR 04, 2019, Orlando, FL
Anmärkning

QC 20190919

Tillgänglig från: 2019-09-19 Skapad: 2019-09-19 Senast uppdaterad: 2024-03-15Bibliografiskt granskad
Organisationer
Identifikatorer
ORCID-id: ORCID iD iconorcid.org/0000-0003-1926-2193

Sök vidare i DiVA

Visa alla publikationer