A high-energy white synchrotron X-ray beam enables penetration of relatively thick and highly absorbing samples. At the P61A White Beam Engineering Materials Science Beamline, operated by Helmholtz-Zentrum Hereon at the PETRA III ring of the Deutsches Elektronen-Synchrotron (DESY), a tailored X-ray radiography system has been developed to perform in-situ X-ray imaging experiments at high temporal resolution, taking advantage of the unprecedented X-ray beam flux delivered by ten successive damping wigglers. The imaging system is equipped with an ultrahigh-speed camera (Phantom v2640) enabling acquisition rates up to 25 kHz at maximal resolution and binned mode. The camera is coupled with optical magnification (5x, 10x) and focusing lenses to enable imaging with a pixel size of 1,35 micrometre. The scintillator screens are housed in a special nitrogen gas cooling environment to withstand the heat load induced by the beam, allowing spatial resolution to be optimized down to few micrometres. We present the current state of the system development, implementation and first results of in situ investigations, especially of the electron beam powder bed fusion (PBF-EB) process, where the details of the mechanism of crack and pore formation during processing of different powder materials, e.g. steels and Ni-based alloys, is not yet known.

The development of a sample environment for in situ x-ray characterization during metal Electron Beam Powder Bed Fusion (PBF-EB), called MiniMelt, is presented. The design considerations, the features of the equipment, and its implementation at the synchrotron facility PETRA III at Deutsches Elektronen-Synchrotron, Hamburg, Germany, are described. The equipment is based on the commercially available Freemelt ONE PBF-EB system but has been customized with a unique process chamber to enable real-time synchrotron measurements during the additive manufacturing process. Furthermore, a new unconfined powder bed design to replicate the conditions of the full-scale PBF-EB process is introduced. The first radiography (15 kHz) and diffraction (1 kHz) measurements of PBF-EB with a hot-work tool steel and a Ni-base superalloy, as well as bulk metal melting with the CMSX-4 alloy, using the sample environment are presented. MiniMelt enables time-resolved investigations of the dynamic phenomena taking place during multi-layer PBF-EB, facilitating process understanding and development of advanced process strategies and materials for PBF-EB.<br />

Additive Manufacturing (AM) is becoming an important technology for manufacturing of metallic materials. Laser-Powder Bed Fusion (L-PBF), Electron beam-Powder Bed Fusion (E-PBF) and Directed Energy Deposition (DED) have attracted significant interest from both the scientific community and the industry since these technologies offer great manufacturing opportunities for niche applications and complex geometries. Understanding the physics behind the complex and dynamic phenomena occurring during these processes is essential for overcoming the barriers that constrain the metal AM development. Insitu synchrotron X-ray characterization is suitable for investigating the microstructure evolution during processing and provides new profound insights. Here, we provide an overview of the research on metal PBF and DED using in-situ synchrotron X-ray imaging, diffraction and small-angle scattering, highlighting the state of the art, the instrumentation, the challenges and the gaps in knowledge that need to be filled. We aim at presenting a scientific roadmap for in-situ synchrotron analysis of metal PBF and DED where future challenges in instrumentation such as the development of experimental stations, sample environments and detectors as well as the need for further application oriented research are included.

In-situ Neutron Diffraction and Small-Angle Neutron Scattering (SANS) are employed for the first time simultaneously in order to reveal the interaction between the austenite to ferrite phase transformation and the precipitation kinetics during isothermal annealing at 650 and at 700 degrees C in three steels with different vanadium ( V ) and carbon ( C ) concentrations. Austenite-to-ferrite phase transformation is observed in all three steels at both temperatures. The phase transformation is completed during a 10 h annealing treatment in all cases. The phase transformation is faster at 650 than at 700 degrees C for all alloys. Additions of vanadium and carbon to the steel composition cause a retardation of the phase transformation. The effect of each element is explained through its contribution to the Gibbs free energy dissipation. The austeniteto-ferrite phase transformation is found to initiate the vanadium carbide precipitation. Larger and fewer precipitates are detected at 700 than at 650 degrees C in all three steels, and a larger number density of precipitates is detected in the steel with higher concentrations of vanadium and carbon. After 10 h of annealing, the precipitated phase does not reach the equilibrium fraction as calculated by ThermoCalc. The external magnetic field applied during the experiments, necessary for the SANS measurements, causes a delay in the onset and time evolution of the austenite-to-ferrite phase transformation and consequently on the precipitation kinetics.