The decentralisation of accurate determination of the ammonium ion (NH4+) is relevant for environmental monitoring (i. e., nitrogen cycle) and certain clinical applications (e. g., kidney and liver diseases). Potentiometric ionophore-based sensors are one alternative for these purposes in terms of versatile implementation, though the potassium ion (K+) is known to be a major source of interference. We herein investigate the use of three different tripodal tris(pyrazolyl) compounds derived from 1,3,5-triethylbenzene as NH4+ ionophores. A complete set of potentiometric experiments together with theoretical simulations reveals suitable analytical performance while demonstrating a suppression of the K+ interference given the formation of an adequate cavity in the ionophore to host NH4+ over K+ in the membrane environment. The results support the use of these electrodes in the analytical detection of NH4+ in a wide range of samples with variable contents.

In vitro electrochemical characterization and in vivo implantation in an animal model were employed to evaluate the degradation behaviour and the biological activity of FeMnSi and FeMnSiCa alloys obtained using UltraCast (Ar atmosphere) melting. Electrochemical characterization was based on open circuit potential measurement, electrochemical impedance spectroscopy and potentiodynamic polarization techniques while the alloys were immersed in Ringer's solution at 37 degrees C for 7 days. Higher corrosion rates were measured for the Cacontaining material, resulting from inefficient passivation of the metal surface by oxy-hydroxide products. In vivo osseointegration was investigated on a tibia implant model in rabbits by referring to a standard control (AISI 316 L) stainless steel using standard biochemical, histological and radiological methods of investigation. Changes in the biochemical parameters were related to the main stages of the bone defect repair, whereas implantation of the alloys in rabbit's tibia provided the necessary mechanical support to the injured bone area and facilitated the growth of the newly connective tissue, as well as osteoid formation and mineralization, as revealed by either histological sections or computed tomography reconstructed images and validated by the bone morphometric indices. The present study highlighted that the FeMnSiCa alloy promotes better osteoinduction and osseconduction processes when compared to the base FeMnSi alloy or with AISI 316 L, and in vivo degradation rates correlate well with corrosion resistance measurements in Ringer's solution.

The monitoring of ammonium ion concentration has gained the attention of researchers from multiple fields since it is a crucial parameter with respect to environmental and biomedical applications. For example, ammonium is considered to be a quality indicator of natural waters as well as a potential biomarker of an enzymatic byproduct in key physiological reactions. Among the classical analytical methods used for the detection of ammonium ions, potentiometric ion-selective electrodes (ISEs) have attracted special attention in the scientific community because of their advantages such as cost-effectiveness, user-friendly features, and miniaturization ability, which facilitate easy portable measurements. Regarding the analytical performance, the key component of ISEs is the selective receptor, labelled as an ionophore in ISE jargon. Indeed, the preference of an ionophore for ammonium amongst other ions (i.e., selectivity) is a factor that primarily dictates the limit of detection of the electrode when performing measurements in real samples. A careful assessment of the literature for the last 20 years reveals that nonactin is by far the most employed ammonium ionophore to date. Despite the remarkable cross-interference of potassium over the ammonium response of nonactin-based ISEs, analytical applications comprising water quality assessment, clinical tests in biological fluids, and sweat monitoring during sports practice have been successfully researched. Nevertheless, there is evident difficulty in the determination of close-to-micromolar levels of ammonium in real samples with a significant potassium background level (i.e., millimolar concentration). This fact has fostered the search for a large variety of ammonium ionophores over the years, which are critically inspected herein. Overall, we provide an easily readable state of the art accompanied by a comprehensive description of other types of ammonium electrodes, including commercially available units. We conclude that newer breakthroughs are still required in the field to reach the desired analytical applications.