Full-Scale Forced Vibration Tests of a Railway Bridge
2021 (English)In: Mechanisms and Machine Science 97, Springer Nature , 2021, p. 224-232Chapter in book (Refereed)
Abstract [en]
This paper presents results from experimental testing of a railway bridge. Forced vibration tests was performed using a hydraulic actuator with variable load amplitude. The estimated modal properties show that the increased load amplitude results in lower natural frequency and higher damping, especially for the first mode of vibration. Despite this, even at relatively large amplitude of vibration the estimated damping is lower than proposed by Eurocode EN 1991–2. A simple 2D model is presented that shows good agreement with the experimental results, both regarding natural frequencies, mode shapes and the response from passing trains.
Place, publisher, year, edition, pages
Springer Nature , 2021. p. 224-232
Keywords [en]
Damping, Dynamic, Forced vibration test, Railway bridge, Resonance, Natural frequencies, Railroad bridges, Railroads, Vibration analysis, Eurocodes, Experimental testing, Forced vibration tests, Large amplitude, Modal properties, Mode shapes, Railway bridges, Variable loads, Hydraulic actuators
National Category
Infrastructure Engineering
Identifiers
URN: urn:nbn:se:kth:diva-290271DOI: 10.1007/978-3-030-64690-5_21Scopus ID: 2-s2.0-85097884669OAI: oai:DiVA.org:kth-290271DiVA, id: diva2:1536579
Note
QC 20210311
2021-03-112021-03-112022-06-25Bibliographically approved