Cellulose and its derivatives are considered sustainable alternatives to non-biodegradable fossil-based plastics. Chemically modified cellulose fibres to dialcohol cellulose (DAC) fibres demonstrated a melt processing window between the glass transition and degradation temperatures which enabled their extrusion by using only water as a temporary plasticizer. With the aim of supporting an industrial upscale of DAC fibres, this study investigates the processing design and the feasibility of melt processing, minimizing the moisture. Melt processes-structure-properties relationships were studied by varying the sequence of primary and secondary melt processes, i.e., extrusion and injection moulding, and by changing the moisture content. The effect of moisture and processing design on the fibre structural properties, such as molecular weight, crystallinity, fibre morphology and fibre suspensions rheology, was assessed. Then, the thermomechanical behaviour of the 3D-shaped DAC injected materials was correlated with DAC fibres structural features obtained by the different processing design and moisture content. Our results identified the injection moulding as a milder process for achieving the preparation of 3D-shaped material with enhanced mechanical properties. Moreover, we disclosed the relevance of controlled moisture in the extrusion process for enabling a secondary shaping directly after compounding and the possibility of 3D-shaping DAC fibres after a rehydration step.