A Parametric Study of Surface Roughness Influence on Press fit performance: An Integrated Approach Involving Theory and Empirical evidence
2025 (English)Independent thesis Advanced level (degree of Master (Two Years)), 20 credits / 30 HE credits
Student thesis
Abstract [en]
Press-fits, also known as interference fits, are a widely used technique to achieve mechanical connection between components without the use of fasteners. In this thesis work, the influence of surface texture on press-fit behavior was investigated. The performance of the press-fits is influenced by several factors. One of the factors is surface texture and experimental investigations have shown that it is a key role in the press-fits performance. Further, to ensure the torsional strength of the press-fits, the general industrial practice is to compare the press force measured during assembly with design guidelines. The changes in surface texture causes variations in press force and introduce uncertainty in the torsional strength of the assembly. Hence understanding the influence of surface texture will facilitate better design and quality assurance during production. The first objective of the thesis is to identify appropriate surface roughness parameters for press-fit application. The second objective is to develop a predictive model for press force. Prototype shafts were manufactured with different surface roughness parameters, assembled with hubs and tested for torsional strength. The actual press forces were compared with predicted values. Two approaches were used to predict press force and compare with actual values. In the first approach, errors ranged from 16 to 48 % and in the second approach, errors were -5 % to 7 %. The torsional strength test showed that the selected roughness parameters for adhesively bonded assemblies meet the acceptance criteria.
Abstract [sv]
Presspassningar, även kända som interferenspassningar, är en mycket använd teknik för att uppnå en mekanisk förbindelse mellan komponenter utan att använda fästelement. I detta examensarbete undersöktes hur ytstrukturen påverkar beteendet hos presspassningar. Prestandan hos presspassningar påverkas av flera faktorer. En av dessa faktorer är ytstruktur. Experimentella studier har visat att den är en nyckelfaktor för presspassningars prestanda. För att säkerställa den vridstyvhet som krävs hos presspassningar är det inom industrin vanligt att jämföra den presskraft som uppmäts under montering med gällande konstruktionsriktlinjer. Förändringar i ytstrukturen orsakar variationer i presskraften och skapar osäkerhet kring förbandets vridstyvhet. Därför kommer en ökad förståelse för ytstrukturens påverkan att underlätta bättre konstruktion och kvalitetssäkring under produktion. Det första målet med examensarbetet är att identifiera lämpliga ytjämnhetsparametrar för presspassningar. Det andra målet är att utveckla en prediktiv modell för presskraft. Prototypaxlar tillverkades med olika ytjämnhetsparametrar, monterades med nav och testades för vridstyrka. De faktiska presskrafterna jämfördes med de förutsagda värdena Två metoder användes för att förutsäga presskraften och jämföra med de faktiska värdena. I den första metoden varierade felen mellan 16 och 48 %, och i den andra metoden låg felen mellan -5 % och 7 %. Vridstyrketestet visade att de valda ytjämnhetsparametrarna för limmade sammanfogningar uppfyller acceptanskriterierna.
Place, publisher, year, edition, pages
2025. , p. 63
Series
TRITA-ITM-EX ; 2025:600
Keywords [en]
Press-fits, Surface roughness parameters, Axial load capacity, press force, slip torque, Torsional strength, Power spectral density of the Surface, Persson contact mechanics theory, DIN 7190-1
Keywords [sv]
Presspassningar, Ytjämnhetsparametrar, Axiell lastkapacitet, Presskraft, Glidmoment, Vridstyrka, Effektens spektrala täthet för ytan
National Category
Production Engineering, Human Work Science and Ergonomics
Identifiers
URN: urn:nbn:se:kth:diva-372863OAI: oai:DiVA.org:kth-372863DiVA, id: diva2:2013552
External cooperation
Scania CV AB
Subject / course
Production Engineering
Educational program
Master of Science - Production Engineering and Management
Presentation
2025-10-30, 00:00
Supervisors
Examiners
2025-11-132025-11-132025-11-13Bibliographically approved