Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Desalination using Membrane Distillation: Experimental and Numerical Study
KTH, Skolan för industriell teknik och management (ITM), Energiteknik, Kraft- och värmeteknologi.
2011 (engelsk)Doktoravhandling, med artikler (Annet vitenskapelig)
Abstract [en]

Desalination has been increasingly adopted over the last decades as an option, and sometimes as a necessity to overcome water shortages in many areas around the world. Today, several thermal and physical separation technologies are well established in large scale production for domestic and industrial purposes.  Membrane distillation is a novel thermally-driven process that can be adapted effectively for water desalination or water treatment in industrial applications, due to its potential lower energy consumption and simplicity.

The general objective of this thesis is to contribute to the technical understanding of membrane distillation as a new technology in water treatment for both industrial and drinking water purposes, as a starting point for further improvement. The thesis includes experimental and numerical investigations that highlight some aspects of the technology application and fundamental aspects.

In the field of industrial application, an experimental and numerical assessment has been carried out on an Air Gap Membrane Distillation (AGMD) prototype to assess the utilization of the technology in thermal cogeneration plants; in particular, demineralization of water boiler feed water and treating flue gas condensate. The main assessment parameters were water quality and energy consumption. The results from full-scale simulations of a system of 10 m3/hr production capacity,  connected to the district heating network were as follows: 5 to 12 kWh/m3 specific thermal energy consumption, and  0,6 to 1,5 kWh/m3 specific electricity consumption, depending upon the heat source (district heat supply line or low-grade steam).

For desalination applications, experimental and simulation work was conducted on an AGMD semi-commercial system as part of the EU MEDESOL project. The aim was to evaluate AGMD performance with saline water of 35 g/l NaCl in order to establish an operation data base for simulation of a three-stage AGMD desalination system. Specific thermal energy consumption was calculated as 950 kWht/m3 for a layout without heat recovery, and 850 kWht/m3 for a layout with one stage heat recovery.  The lack of internal heat recovery in the current MD module means that most of the heat supplied to MD system was not utilized efficiently, so the thermal energy consumption is high. This would mean that a large solar field is needed.

In order to analyze the flow conditions in feed flow and cooling channels, CFD was used as tool to analyze a spacer-obstructed flow channel for different types of spacer geometrical characteristics: flow of attack angle, spacer to channel thickness ratio, and void ratio. Velocity profiles, shear stress, and pressure drop were the main assessment criteria. Results show the flow of attack angle has a very minimum effect on the performance of spacers. The effect of spacer to channel thickness ratio was significant in all assessment parameters. Higher void ratios were found advantageous in promoting flow mixing, but resulted in lower sheer stress and hence reduced heat transfer.

Physical modifications were implemented on a semi-commercial AGMD prototype to assess experimentally any improvement in its performance. These modifications were mainly focused on reducing the conductive heat transfer losses by modifying the physical support in the air gap that separates the membrane from the condensation surface. In addition, several feed channel spacers were tested and assessed based on their effect in increasing the mass transfer while maintaining or reducing pressure drop. The modifications yielded a two-fold augmentation: slight increase in the distillate mass flow rate (9-11%), and increased thermal efficiency (6%). The pressure drop in the module was reduced by 50% through selecting the appropriate spacer that would achieve the above mass flow rate increase.

sted, utgiver, år, opplag, sider
Stockholm: KTH Royal Institute of Technology , 2011. , s. xiv, 86
Serie
Trita-KRV, ISSN 1100-7990 ; 11:7
Emneord [en]
Air gap membrane distillation, applications, experimental and simulation, CFD, physical modification, performance improvement
HSV kategori
Identifikatorer
URN: urn:nbn:se:kth:diva-44405ISBN: 978-91-7501-133-2 (tryckt)OAI: oai:DiVA.org:kth-44405DiVA, id: diva2:450562
Disputas
2011-10-28, M 2, Brinellväg. 64, KTH, Stockholm, 10:00 (engelsk)
Opponent
Veileder
Merknad
QC 20111021Tilgjengelig fra: 2011-10-21 Laget: 2011-10-20 Sist oppdatert: 2022-06-24bibliografisk kontrollert
Delarbeid
1. Membrane distillation and applications for water purification in thermal cogeneration plants
Åpne denne publikasjonen i ny fane eller vindu >>Membrane distillation and applications for water purification in thermal cogeneration plants
2011 (engelsk)Inngår i: Separation and Purification Technology, ISSN 1383-5866, E-ISSN 1873-3794, Vol. 76, nr 3, s. 231-237Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

Water treatment is an important auxiliary process in all thermal cogeneration plants. In this context membrane distillation (MD) is a novel technology that has potential advantages in: the ability to utilize low-grade heat instead of electricity; reduced sensitivity to fluctuations in pH or salt concentrations. This research is a continuation of a previously conducted theoretical study where the performance of MD-based water treatment was explored via laboratory testing, system simulations of thermodynamic performance, and economic evaluations. The current paper, encompassing field trials, contains details of a test rig deployed at Idbacken Cogeneration Facility (Nykoping, Sweden) with a five-module MD unit capable of producing 1-2 m(3)/day purified water. District heating supply line was employed for heating while municipal water was used for cooling; feed stocks include municipal water and flue gas condensate. A long-term performance evaluation including thorough chemical testing of product water quality is presented. (c) 2010 Elsevier B.V. All rights reserved.

Emneord
Membrane distillation, Low-grade heat, Water treatment, Flue gas condensate
HSV kategori
Identifikatorer
urn:nbn:se:kth:diva-30981 (URN)10.1016/j.seppur.2010.09.028 (DOI)000286712600002 ()2-s2.0-78650521877 (Scopus ID)
Merknad
QC 20110310Tilgjengelig fra: 2011-03-10 Laget: 2011-03-07 Sist oppdatert: 2024-03-15bibliografisk kontrollert
2. Experimental and Simulation of an Air Gap Membrane Distillation System
Åpne denne publikasjonen i ny fane eller vindu >>Experimental and Simulation of an Air Gap Membrane Distillation System
(engelsk)Inngår i: Desalination, ISSN 0011-9164, E-ISSN 1873-4464Artikkel i tidsskrift (Annet vitenskapelig) Submitted
Abstract [en]

This paper covers the details and results of experimental and simulation work carried on an Air Gap Membrane Distillation (AGMD) unit, as a part of EU MEDESOL research project. The aim of the experimental work, carried out during a two-week period, was (a) to evaluate the MD performance with saline water (35 g/l NaCl)  establishing an operation data base, and (b) to conduct a system simulation for the design and evaluation of a three-stage MD desalination system. Experimental results shows that production was 30-40% less in the case of using 35 g/l salinity compared with 1 g/l.  Experimental-based simulations of a three step MD system of two arrangement layout were employed to assess the heat demand. Specific thermal energy consumption was calculated as 950 kWht/m3 for a layout without heat recovery, and 850 kWht/m3 for the layout with one stage heat recovery.

Emneord
MEDESOL, AGMD, experiments, Simulation
HSV kategori
Identifikatorer
urn:nbn:se:kth:diva-44476 (URN)
Prosjekter
EU MEDESOL
Merknad
QS 2011 QS 20120327Tilgjengelig fra: 2011-10-21 Laget: 2011-10-21 Sist oppdatert: 2022-06-24bibliografisk kontrollert
3. CFD Analysis of Spacer-Obstructed Channels in Membrane Distillation
Åpne denne publikasjonen i ny fane eller vindu >>CFD Analysis of Spacer-Obstructed Channels in Membrane Distillation
(engelsk)Manuskript (preprint) (Annet vitenskapelig)
Abstract [en]

Spacers are used in desalination and filtration technologies to enhance the hydrodynamic conditions in flow channels, as well as to provide support and separation of membrane sheets. This paper present the main results of computational fluid dynamics (CFD) simulation for flow in spacer-obstructed flow channel for application in membrane distillation (MD). Flow of attack angle, spacer-to-channel thickness and void ratio were the main geometrical parameters that were studied; velocity profiles, shear stress and pressure drops were the main assessment criteria used for evaluation. Results show the flow of attack angle has a very minimum effect on the performance of spacers. The effect of spacer to channel thickness ratio was significant in all assessment parameters. Higher void ratios were found advantageous in promoting flow mixing, but resulted in lower sheer stress and reduced trans-membrane flux. In practice, the selection of the best case would include a trade-off between the cost of membranes needed to produce the required production and pumping.

Emneord
CFD, Membrane Distillation, sheer stress, pressure drop
HSV kategori
Identifikatorer
urn:nbn:se:kth:diva-44482 (URN)
Merknad
QS 2011. Manuscript to be submitted to Journal of Membrane ScienceTilgjengelig fra: 2011-10-21 Laget: 2011-10-21 Sist oppdatert: 2022-06-24bibliografisk kontrollert
4. Experimental Evaluation of a Modified Air-gap Membrane Distillation Semi-Commercial Prototype
Åpne denne publikasjonen i ny fane eller vindu >>Experimental Evaluation of a Modified Air-gap Membrane Distillation Semi-Commercial Prototype
(engelsk)Inngår i: Desalination, ISSN 0011-9164, E-ISSN 1873-4464Artikkel i tidsskrift (Annet vitenskapelig) Submitted
Abstract [en]

Modifications were implemented on a semi-commercial Air Gap Membrane Distillation prototype to assess experimentally any improvement in its performance. These modifications were many focused on reducing the conductive heat transfer losses by reducing the physical support in the air gap that separate the membrane from the condensation surface. Several feed channel spacers were tested as well and assessed based in their effect in increasing the mass transfer and imposed pressure drop. Results show that the modifications increased slightly the distillate mass flow rate by 9-11 % and reduced the conductive heat losses by 20-24 %. Spacer effect was found to be mainly in imposed pressure drop within the tested types.

Emneord
Membrane distillation, conductive heat losses, experimental work
HSV kategori
Identifikatorer
urn:nbn:se:kth:diva-44483 (URN)
Merknad
QS 2011 QS 20120327Tilgjengelig fra: 2011-10-21 Laget: 2011-10-21 Sist oppdatert: 2022-06-24bibliografisk kontrollert

Open Access i DiVA

Desalination using Membrane Distillation(7130 kB)14683 nedlastinger
Filinformasjon
Fil FULLTEXT01.pdfFilstørrelse 7130 kBChecksum SHA-512
41582e4a107f1d01efa673d2344eff9a986fe78f95a49060673c9092388d043ce1a0d53958f7d3898ec1f4d6c2c3e98616220f9cde05f0bbad1a0be01efc0d21
Type fulltextMimetype application/pdf

Søk i DiVA

Av forfatter/redaktør
Kullab, Alaa
Av organisasjonen

Søk utenfor DiVA

GoogleGoogle Scholar
Totalt: 14704 nedlastinger
Antall nedlastinger er summen av alle nedlastinger av alle fulltekster. Det kan for eksempel være tidligere versjoner som er ikke lenger tilgjengelige

isbn
urn-nbn

Altmetric

isbn
urn-nbn
Totalt: 6115 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf