Tafel slopes used in monitoring of copper corrosion in a bentonite/groundwater environment
2005 (English)In: Corrosion Science, ISSN 0010-938X, E-ISSN 1879-0496, Vol. 47, no 12, p. 3267-3279Article in journal (Refereed) Published
Abstract [en]
The harmonic analysis, the polarization resistance, and the noise resistance methods have been applied in an effort to monitor corrosion of pure copper in a bentonite/groundwater environment with commercially available equipment. Without the need to use a reference electrode, the first method supplies not only an estimate of the corrosion rate, but also estimates of Tafel slopes required by the other methods. The recorded corrosion rate is overestimated but to a varying degree. While the recorded corrosion rates for the first two methods give quite similar values far below 3 lm/year, the electrochemical noise resistance method gives considerably higher values.
Place, publisher, year, edition, pages
Elsevier , 2005. Vol. 47, no 12, p. 3267-3279
Keywords [en]
copper, polarization, weight-loss
National Category
Other Chemistry Topics Materials Engineering
Identifiers
URN: urn:nbn:se:kth:diva-60487DOI: 10.1016/j.corsci.2005.07.007ISI: 000233535000026Scopus ID: 2-s2.0-27644587171OAI: oai:DiVA.org:kth-60487DiVA, id: diva2:477432
Note
NOTICE: this is the author’s version of a work that was accepted for publication in Corrosion Science. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Corrosion Science, VOL 47, ISSUE 12, 22 September 2005. QC 20120118
2012-01-182012-01-132022-06-24Bibliographically approved