A triaxial rheometer for soft compressible solids
2002 (English)In: Journal of Rheology, ISSN 0148-6055, Vol. 46, no 1, p. 31-47Article in journal (Refereed) Published
Abstract [en]
The compression and the shear of soft compressible solids were studied using the triaxial rheometer. The sample was fixed between two parallel plates and the deformation was controlled by an x, y, z displacement on one plate while the stress was measured on the other. The triaxial stress transducer eliminates the edge effects by only measuring the stress on an interior region of the plate. The edge effects and the associated measurement errors were analyzed by the simple isotropic elastic theory and were compared to the measurements done on the chloroprene rubber foam.
Place, publisher, year, edition, pages
2002. Vol. 46, no 1, p. 31-47
Keywords [en]
Anisotropy, Boundary conditions, Cantilever beams, Capacitance, Capacitors, Edge detection, Elasticity, Foams, Microstructure, Ordinary differential equations, Rheometers, Shear deformation, Shear stress, Stiffness, Torsional stress, Viscoelasticity, Hooke's law, Soft compressible solids, Compressibility of solids
National Category
Applied Mechanics
Identifiers
URN: urn:nbn:se:kth:diva-80043DOI: 10.1122/1.1428322ISI: 000174333200003Scopus ID: 2-s2.0-0036254840OAI: oai:DiVA.org:kth-80043DiVA, id: diva2:496003
Note
References: Dealy, J.M., Soong, S.S., A parallel plate metal rheometer incorporating a shear stress transducer (1984) J. Rheol., 28, pp. 355-365; Demarquette, N.R., Dealy, J.M., Nonlinear viscoelasticity of concentrated polystyrene solutions: Sliding plate rheometer studies (1992) J. Rheol., 42, pp. 833-841; Ericsson, K.A., Toll, S., MÃ¥nson, J.-A.E., Behavior of a concentrated planar fiber suspension in gapwise shear flow using a sliding plate rheometer (1994) Proceedings of the Fourth European Rheology Conference, pp. 483-485. , Seville; Ericsson, K.A., Toll, S., MÃ¥nson, J.-A.E., Sliding plate rheometry of planar oriented concentrated fiber suspension (1997) Rheol. Acta, 36, pp. 397-405; Giacomin, A.J., Samurkas, T., Dealy, J.M., A novel sliding plate rheometer for molten plastics (1989) Polym. Eng. Sci., 29, pp. 499-504; Hatzikiriakos, S.G., Dealy, J.M., Wall slip of molten high density polyethylene. I. Sliding plate rheometer studies (1991) J. Rheol., 35, pp. 497-523; HÃŒrlimann, H.P., A multidirectional shear rheometer for polymer melts (1991) Rheol. Acta, 30, pp. 480-490; Kraft, M., Meissner, J., Shear-induced rheological anisotropy of polymer melts (1994) Proceedings of the Fourth European Rheology Conference, pp. 489-491. , Seville; Macosko, C.W., (1994) Rheology Principles, Measurements, and Applications, 1. , VCH, New York, Chap. 6.5; Meissner, J., Experimental methods in polymer melt rheology (1993) Makromol. Chem., Macromol. Symp., 39, pp. 267-283; Powell, R.L., (1998) Rheological Measurements, 1. , Chapman and Hall, London, Chap. 9; Read, W.T., Effect of stress-free edges in plane shear of a flat body (1993) J. Appl. Mech., 17, pp. 349-352; Reimers, M.J., Dealy, J.M., Sliding plate rheometer studies of concentrated polystyrene solutions: Large amplitude oscillatory shear of a very high molecular weight polymer diethyl phthalate (1996) J. Rheol., 40, pp. 167-186
NR 20140805
2012-02-092012-02-092022-06-24Bibliographically approved